Audited Supplier
PC10-C
Piezoresistive Pressure Sensor
SemiConductor Type
Diffused Silicon Pressure Transmitter
Analog Type
Normal Wirewound
Stainless Steel
No
Four-Wire
Liquid, Gas
IP65
CE
Customized
-100kpa~-100kpa…0~35kpa…60MPa
Gauge/Absolute/Sealed Gauge Pressure
0.5%Fs
0.1%Fs
0.1%Fs
≤90ms
≥106 Pressure Cycles
-20ºC~85ºC
-30ºC~105ºC
-40ºC~125ºC
WTsensor
Carton
Diameter: 19mm
China
Product Description
PC10-C Sensor Circuit Components
Features
316L stainless steel diaphragm structure
Sensor + circuit structure
Small size, light weight
The product has been calibrated and used directly after installation
Strong anti-interference, good long-term stability
Wide range, can measure absolute pressure, gauge pressure and seal pressure
Applications
Process control
Aviation and aerospace
Automobile, medical equipment
Piping system
Product overview
The pressure sensitive core of PC10-C Sensor circuit components uses PC10 diffused silicon sensor.
The nanocore microdigital circuit is used to convert the sensor millivolt signal into a standard current signal, which can be directly connected to the
computer interface card, control instrument, intelligent instrument or PLC, etc.Current output can be used for long-distance transmission.
Note: G: Gauge pressure, A: Absolute pressure, S: Sealed gauge pressure
Example: PC10-C-35kGB1316L stainless steel diaphragm structure
Sensor + circuit structure
Small size, light weight
The product has been calibrated and used directly after installation
Strong anti-interference, good long-term stability
Wide range, can measure absolute pressure, gauge pressure and seal pressure
Applications
Process control
Aviation and aerospace
Automobile, medical equipment
Piping system
Product overview
The pressure sensitive core of PC10-C Sensor circuit components uses PC10 diffused silicon sensor.
The nanocore microdigital circuit is used to convert the sensor millivolt signal into a standard current signal, which can be directly connected to the
computer interface card, control instrument, intelligent instrument or PLC, etc.Current output can be used for long-distance transmission.
| Electrical performance parameters | |||||||
| Pressure range | -100kPa~-100kPa…0~35kPa…60MPa | ||||||
| Pressure reference | Gauge pressure, Absolute pressure, Sealed gauge pressure | ||||||
| Accuracy | 0.5%FS | ||||||
| Hysteresis | 0.1%FS | ||||||
| Repeatability | 0.1%FS | ||||||
| Temp. drift | 35kPa:±3%FS(0ºC~60ºC) Others:±1.5%FS(-10ºC~70ºC) | ||||||
| Response time | ≤90ms (Up to 90%FS) | ||||||
| Overload pressure | Refer to "Pressure range selection" | ||||||
| Durability | ≥106 pressure cycles | ||||||
| Ambient temp. | -20ºC~85ºC | ||||||
| Medium temp. | -30ºC~105ºC | ||||||
| Storage temp. | -40ºC~125ºC | ||||||
| Insulation resistance | ≥250MΩ/500VDC(100MΩ/250VDC) | ||||||
| Output and power supply | |||||||
| Code | B1 | B3 | B7 | B6 | B6N | ||
| Output | 4~20mA | 0~5V | 0~10V | 0.5~4.5V R/M | 0.5~4.5V Non R/M | ||
| Power supply | 12~30VDC | 5VDC | |||||
| Electrical connection | |||||||
| Connection mode Current (2 wires) | Red: Supply+ Blue: Current output | ||||||
| Connection mode Voltage (3 wires) | Red: Supply+ Blue: Ground Yellow: Voltage output | ||||||
| Pressure range selection | |||||
| Code | Pressure reference | Pressure range | Overpressure | Burst pressure | Remark |
| (-100~0)k | G | (-100~0)k | 300%FS | 600%FS | |
| 10k | G | 0~10kPa | 300%FS | 600%FS | |
| 35k | G, A | 0~35kPa | 300%FS | 600%FS | |
| 70k | G | 0~70kPa | 300%FS | 500%FS | |
| 100k | G, A | 0~100kPa | 200%FS | 500%FS | |
| 250k | G, A | 0~250kPa | 200%FS | 500%FS | |
| 600k | G, A | 0~600kPa | 200%FS | 500%FS | |
| 1M | G, A | 0~1MPa | 200%FS | 500%FS | |
| 1.6M | G, A, S | 0~1.6MPa | 200%FS | 500%FS | |
| 2.5M | S | 0~2.5MPa | 200%FS | 500%FS | |
| 6M | S | 0~6MPa | 200%FS | 400%FS | |
| 10M | S | 0~10MPa | 200%FS | 400%FS | |
| 25M | S | 0~25MPa | 200%FS | 400%FS | |
| 40M | S | 0~40MPa | 200%FS | 400%FS | |
| 60M | S | 0~60MPa | 150%FS | 300%FS | |
Note: G: Gauge pressure, A: Absolute pressure, S: Sealed gauge pressure
Product model:PC10 with circuit board components. 35k:pressure range 0~35kPa. G:gauge pressure. B1: output signal 4~20mA.
About US:
Certification:
FAQ:
1. Q: Are you manufacturer or trading company?
A: We are manufacturer which focuses on pressure sensor, pressure gauge and level sensor for 33 years.
2. Q: What international certificates do you have?
A: ISO9001, CE, RoHS Certificated.
3. Q: What is your production capacity?
A: We produced 2000000 pieces pressure sensor since year 2017.
4. Q: What is the lead time of your product?
A: Stocks are available for some products. The typical lead time is 6~14 working days for product without customization.
Note: lead time may vary base on different products. Please contact us for detailed lead time.
5. Q: What is the warranty of your products?
A: Our warranty time is 18 months after shipment.
6. Q: Do you provide customized products?
A: Yes, we can laser mark your logo, model and product information according to your requirement. We provide OEM and ODM service.
1. Q: Are you manufacturer or trading company?
A: We are manufacturer which focuses on pressure sensor, pressure gauge and level sensor for 33 years.
2. Q: What international certificates do you have?
A: ISO9001, CE, RoHS Certificated.
3. Q: What is your production capacity?
A: We produced 2000000 pieces pressure sensor since year 2017.
4. Q: What is the lead time of your product?
A: Stocks are available for some products. The typical lead time is 6~14 working days for product without customization.
Note: lead time may vary base on different products. Please contact us for detailed lead time.
5. Q: What is the warranty of your products?
A: Our warranty time is 18 months after shipment.
6. Q: Do you provide customized products?
A: Yes, we can laser mark your logo, model and product information according to your requirement. We provide OEM and ODM service.
