Audited Supplier
SD-1000 Conveyor Monorail Series
1. Standard precision screw rods are narrowed to ensure narrow and smooth adjustment;
2. Adopt professional wear-resistant anti-static flat belt, special electrophoresis 3.0MM thick aluminum; profile rail to ensure smooth connection and stable transportation;
3. Standard signal line for online connection to other devices;
4. According to customer requirements, we can make feeders with different lengths of guide rails;
5.The work surface is equipped with anti-static rubber to better prevent static electricity;
6. The transfer motor uses two 42*48 stepper motors;
7. Compatible with standard SMEMA interface.
Model | SD-1000 |
Dimensions | 1000*750*1750mm |
PCB board width | 50-350mm |
Transport height | 900±20mm |
PCB transportation direction | L-R(R-L) |
PCB transport speed | 0~2000mm |
Power supply | AC220V1P 50/60Hz |
Power consumption | Approx.30W |
Track length | 1000mm(can be customized for different lengths) |
Control method | PCB board control |
Work surface (with electrostatic rubber) | 800*200mm |
| Lighting | LED light |
Weight | Appro.50KG |
Communication Interface | Two-wire cable (compatible with standard SMEMA interface) |
Monorail | Front fixed edge, rear movable edge (optional popst fixed) |
Maintenance and repair(1) High temperature
The machine is easy to malfunction in the high temperature environmentthus affects the production. Manufacturers do not know the cause of thecase that is mechanical damage, only normal use, attention tomaintenance and micro-repair, these mechanical failure control.
(2) Voltage problem
After-sales service manufacturers often encounter customer response tomechanical failure, such as mechanical heating can not work, unable torotate control display instability. The causes of the above failures, inaddition to a few poor quality, most of the voltage is not enough, capacityis not enough, line aging and lead to imbalance between circuits. If it isnot repaired in time, the machine will burn out.
(3) Professional maintenance
Equipment professional electrical maintenance personnel, regularmaintenance and repair of machinery. Can also be under the guidancof manufacturers to do a good job in the daily maintenance and regulamaintenance of machinery.
FAQ:
1) This is the first time I use this kind of machine, is it easy to operate?
There is English manual or guide video that show you how to use machine.
If you still have any question, please contact us by e-mail / skype/ phone /trademanager online service.
2) If machine have any problem after I receive it, how can I do ?
Free parts send to you in machine warranty period.
If the part is less than 0.5KG, we pay the postage.
If it exceeds 0.5KG, you need to pay the postage.
3) MOQ ?
1 set machine, mixed order is also welcomed.
4) How can I buy this machine from you? ( Very easy and flexible !)
A. Consult us about this product on line or by e-mail.
B. Negotiate and confirm the final price , shipping , payment methods and other terms.
C. Send you the proforma invoice and confirm your order.
D. Make the payment according to the method put on proforma invoice.
E. We prepare for your order in terms of the proforma invoice after confirming your full payment.
And 100% quality check before shipping.
F.Send your order by air or by sea.
