Audited Supplier
LMCV4-FIBER-M
Online
10 Months
Non-Customized
Standard Component
Laser Control Card
BJJCZ
Carton
Control fiber laser marking machine
Shenzhen, China
8517706000
Product Description
Application
LMCV4-FIBER-M control board is used for fiber laser marking / engraving machine.
Can mark text, vector diagram, QR code, bar code, rotary ring, circle and so on.
Main feature
Standard DB25 connector, can be wire to IPG laser directly.
Galvo control signal is digital, which can be connect to most scanhead directly.
Multiple boards on 1 computer: One computer can control up to 8 control board to mark different pattern simultaneously
Extension axis(step motor or sever motor): two set of direction/pulse signal can be used to control 2 step(server) motors.
6 general input signals(TTL campatible): In0-In3, XORG0(IN14), IN15.
2 general output signals(TTL campatible): OUT4-OUT5 coming out of Con4.
Compatible with USB2.0 specifications.
In this picture above:
CON1:scanhead control socket, DB15
CON2:laser control socket, DB25
CON4:power supply ,extension axis control and i/o, DB15
The control board need a 5V DC power supply. We recommend a 5V/3A DC supply. The Vcc and Gnd pin are 4/5 and 12/13 of CON4 respectively.
CON1:
CON2:
CON4:
EzCad2 marking software included
Marking application
Distinguish
What inside?
Control board
Adapter cable to laser source
USB cable to computer
Connectors
Application of laser marking machine:
More details of laser marking machine: https://ckdlaser.en.made-in-china.com
LMCV4-FIBER-M control board is used for fiber laser marking / engraving machine.
Can mark text, vector diagram, QR code, bar code, rotary ring, circle and so on.
Main feature
Standard DB25 connector, can be wire to IPG laser directly.
Galvo control signal is digital, which can be connect to most scanhead directly.
Multiple boards on 1 computer: One computer can control up to 8 control board to mark different pattern simultaneously
Extension axis(step motor or sever motor): two set of direction/pulse signal can be used to control 2 step(server) motors.
6 general input signals(TTL campatible): In0-In3, XORG0(IN14), IN15.
2 general output signals(TTL campatible): OUT4-OUT5 coming out of Con4.
Compatible with USB2.0 specifications.
In this picture above:CON1:scanhead control socket, DB15
CON2:laser control socket, DB25
CON4:power supply ,extension axis control and i/o, DB15
| CON4 pins | Name | function |
| 4, 5 | VCC | +5V power supply |
| 11, 12, 13 | GND | Reference ground of the power supply. |
CON1:
| Pin | Name | Function |
| 1, 9 | CLK- / CLK+ | Clock signal- / Clock signal+ |
| 2,10 | SYNC- / SYNC+ | Synchronization signal - / Synchronization signal+ |
| 3, 11 | X Channel- / X Channel+ | Scanhead signal X- / Scanhead signal X+ |
| 4, 12 | Y Channel- / Y Channel+ | Scanhead signal Y- / Scanhead signal Y+ |
| 5, 13 | Z Channel- / Z Channel+ | Scanhead signal Z- / Scanhead signal Z+ |
| 6, 14 | Status-/Status+ | Reserved |
| 7 | NULL | Reserved |
| 8, 15 | GND | Reference signal |
CON2:
| Pin No. | Signal | Illustration |
| 1 - 8 | P0 - P7 | Laser power signal.TTL compatible |
| 9 | PLATCH | Power signal latch. TTL compatible. |
| 10, 14, | GND | The reference ground of the control board. |
| 11,12,16,21 | LASERST0~3 | Alarm signal of Laser module |
| 17 | VCC | 5V power output. |
| 18 | MO | Main oscillator signal. TTL compatible. |
| 19 | AP | Power amplifier signal. TTL compatible. |
| 20 | PRR | Pulse repetitive rate signal. TTL compatible. |
| 22 | RedPt | Red light pointer signal. TTL compatible. |
| 23 | EMSTOP | Emergency stop signal. TTL compatible. |
| 13,24,25 | Unconnected. |
CON4:
| Pin | NAME | Function |
| 1 | XORG0 | The home signal of extension axis X. To use this pin just connect it and GND to a switch. In software In14 represents this pin. |
| 2 | GIN15 | General input in15, using GND as a reference ground. |
| 2, 10 | OUT4, OUT5 | General Output Out 4-Out 5, using GND as reference ground. They are all TTL output . |
| 4, 5 | Vin | Input pin for 5V power supply. |
| 11, 12, 13 | Gnd | Reference ground of 5V power supply |
| 14 | XDIR+ | Direction signal of extension axis X. It is a TTL output. For common anode, use VCC and XDIR+ signals, and VCC is anode signal. |
| 15 | XPUL+- | Pulse signal of extension axis X. It is a TTL output. For common anode, use VCC and XDIR+ signals, and VCC is anode signal. |
| 8 | ReMark | Repeat marking signal. Use GND as a reference ground, to use this signal just connect a switch between this pin and GND. When it is activated the control will mark the content in the cache. |
EzCad2 marking software included
Marking application
Distinguish
What inside?Control board
Adapter cable to laser source
USB cable to computer
Connectors
Application of laser marking machine:
More details of laser marking machine: https://ckdlaser.en.made-in-china.com
