Audited Supplier
SL-5045
PE
Surface Protection Film
Transparent
Soft
Blow Molding
30um ~ 100um
200mm ~ 1500mm
15m ~ 1000m
Free
SANLI
as Your Required
SGS
China
39199090
Product Description
The Protective Film for Floor and Tile could provide a protective barrier to scratch, damage and dirt at the process of transportation and installation. Stable adhering capacity, easy to stick on an tear off, easy to use and left no residue.
The following size is the normal size we always produce, are there suitable for you?
Thickness: 40microns to 100microns (1.7mil to 4mil)
Width: 600mm, 1000mm, 1200mm, ( 24'', 36'', 48'')
Length: 25m, 50m, 60m, 100m, 150m. (100', 200', 300'', 500'')
We can also produce the other size as your detailed requirements.
Colour: Transparent, Blue, Red, Yellow, Green and so on.
Normal Package: One roll per white box, several boxes per pallet.
Colour Carton, label, Instruction sheet and others could also be accepted.
We can print your logo or company name on the surface of the film
Application Guidelines
* The film will adhere to itself; You can create wider strips if desired.
* In all cases do not allow the film to remain on surface for longer than 45 days. If necessary, remove old film and replace immediately with fresh film.
* Film is one time use only, remove and dispose of at the end of the project in accordance with environmental regulations.
* Customers must fully evaluate the product by testing prior to using.
The following size is the normal size we always produce, are there suitable for you?
Thickness: 40microns to 100microns (1.7mil to 4mil)
Width: 600mm, 1000mm, 1200mm, ( 24'', 36'', 48'')
Length: 25m, 50m, 60m, 100m, 150m. (100', 200', 300'', 500'')
We can also produce the other size as your detailed requirements.
Colour: Transparent, Blue, Red, Yellow, Green and so on.
Normal Package: One roll per white box, several boxes per pallet.
Colour Carton, label, Instruction sheet and others could also be accepted.
We can print your logo or company name on the surface of the film
Application Guidelines
* The film will adhere to itself; You can create wider strips if desired.
* In all cases do not allow the film to remain on surface for longer than 45 days. If necessary, remove old film and replace immediately with fresh film.
* Film is one time use only, remove and dispose of at the end of the project in accordance with environmental regulations.
* Customers must fully evaluate the product by testing prior to using.
