Audited Supplier
PE Release Film
76mm
HDPE
0.03--0.07mm
76mm
≥30
≥150
Upass
Bubble Membrane + Tray
Thickness 0.03-0.07 mm
China
3901100090
Product Description
Embossed Release Liner
A release liner is a pleastic release film which made of PE, PP or PET film as carrier, silicon coated on either one or two-sided releases options.The film is uniform coated and very smooth and clean without wrinkles/tears/granules/bubbles/pinholes or other defects. This highly conformable product bonds well to most surfaces over a wide range of temperatures and release film is heavily used in consumer products worldwide.
Description:
Embossed Release Liner as a release material. Its surface can be coating of ultra-thin layer of silicon from the type of material. The products are widely used in protective film, self-adhesive products, foam tape, die-cutting pressing, demoulding and other industries. It plays a very good isolation and protection role.
Advantages:
1.Easy peel off when remove the release film.
2.High residual adhesiveness rate(≥70%) to prevent the influence of silicon transfer on products.
3.Environmental Production technology of solvent and solvent-free products.
4.Environmentally Friendly. Can be recycling.
5.We have rich experience in product research and development to meet the various needs of customers.
Performance Index
| Item | Unit | Index |
| Thickness | mm | 0.03-0.07 |
| Width | mm | 900-1200 |
| Sleeve ID | mm | 76 |
| Max.Tension Strength | N/50mm | ≥30 |
| Peeling force | G/inch | ≥150 |
| Subsequent adhesion rate | % | ≥75 |
Company Profile
Certifications
Packaging and Shipping
FAQ
Q1: Are you trading company or manufacturer ?
A1: We are manufacturer.
Q2: Do you provide samples ? is it free or extra charge?
A2: Yes, we could offer A4 sample for free charge but if you need in roll,
we can offer 100-200m/roll for free, but shipping cost need you to paid.
Q3: How long is your delivery time?
A3: Depends on your quantity. Generally it is about 30 days for 20GP container.
Q4: How to pay for your goods?
A4: By L/C, by T/T (30% deposit before production, 70% balance before loading).
