Audited Supplier
PP
Medical, Household, Electronics, Automotive, Agricultural
RoHS, ISO
SWKS
Plastic Bag
TMM-1
Tianjin
Product Description
High Quality Injection Molding Plastic Ball Parts 6mm 9mm Super White Plastic Ball Plastic Parts
Plastic hollow floating ball has the features of the center of gravity is stable, non-pollution, long life performance and great
coverage effect. This products is widely used in coagulate water tank and sweet-water tank of kinds of horizontal acid storage tank and water treatment.
It can reduce the heat loss in large measure, decrease the water pollution from the acid fog, the carbon dioxide and oxygen from the air, then protect the operator's health, thus we can achieve an effect on maintaining the water quality, saving energy and purifying environment.
Product advantages:
1. Large Void Space, low pressure drop
2. Low mass-transfer unit height
3.High flooding point, uniform gas-liquid contact
4.High mass transfer efficiency
5.Professional factory and high quality
6.Application temperature in media ranges from 60ºC to 150ºC.
Product application:
Used in the packing towers in petroleum industry, chemical industry, alkali-Chloride industry, coal gas industry and environmental protection.
coverage effect. This products is widely used in coagulate water tank and sweet-water tank of kinds of horizontal acid storage tank and water treatment.
It can reduce the heat loss in large measure, decrease the water pollution from the acid fog, the carbon dioxide and oxygen from the air, then protect the operator's health, thus we can achieve an effect on maintaining the water quality, saving energy and purifying environment.
Product advantages:
1. Large Void Space, low pressure drop
2. Low mass-transfer unit height
3.High flooding point, uniform gas-liquid contact
4.High mass transfer efficiency
5.Professional factory and high quality
6.Application temperature in media ranges from 60ºC to 150ºC.
Product application:
Used in the packing towers in petroleum industry, chemical industry, alkali-Chloride industry, coal gas industry and environmental protection.
PA Plastic Ball (Nylon)
Densiry:Around 1.1g/cm3
Grade:G0-G3(0.01-0.05mm)
Feature:preferably the alkali metal,adapt to the neutral characteristics of petroleum products and all kinds of chemical products
Applications:Used in check valve, light load, the knob pull switch, low-cost.
Grade:G0-G3(0.01-0.05mm)
Feature:preferably the alkali metal,adapt to the neutral characteristics of petroleum products and all kinds of chemical products
Applications:Used in check valve, light load, the knob pull switch, low-cost.
PP Plastic Ball(Polypropylene)
Densiry:Around 0.88g/cm3
Grade:G0-G3(0.01-0.05mm)
Feature:good resistance and chemical resistance, density less than water,the highest melting point.
Applications:used for transfusion, level calibration indicator.
Grade:G0-G3(0.01-0.05mm)
Feature:good resistance and chemical resistance, density less than water,the highest melting point.
Applications:used for transfusion, level calibration indicator.
PTFE Plastic Ball
Densiry:Around 2.2g/cm3
Grade:G0-G3(0.01-0.05mm)
Feature:excellent chemical stability, resistance to corrosion,sealing, high lubricity non-tackiness,most corrosive resistant
possessed electrically insulating material
Applications:Particularly suitable for use in cryogenic liquids and acids under the conditions of the instrument.
Grade:G0-G3(0.01-0.05mm)
Feature:excellent chemical stability, resistance to corrosion,sealing, high lubricity non-tackiness,most corrosive resistant
possessed electrically insulating material
Applications:Particularly suitable for use in cryogenic liquids and acids under the conditions of the instrument.
POM Plastic ball
Densiry:1.4g/cm^3
Grade:G0-G3(0.01-0.05mm)
Grade:G0-G3(0.01-0.05mm)
Feature:similar to nylon slightly, harder larger density
low water absorption,the most hard and wear resistant materials.Applications:POM ball table,drawer slide device bearings, rollers, valves, electronic apparatus, sailing apparatus.
low water absorption,the most hard and wear resistant materials.Applications:POM ball table,drawer slide device bearings, rollers, valves, electronic apparatus, sailing apparatus.
Q1. Can you provide sample to test?Yes, we can provides customers samples and catalog within one day on request.
Q2. What's your MOQ?
We have no MOQ requirement, we offer Mini pack and Micro Pack to meet your less than case quantity requirement.
Q3. What's your delivery time?
3 working days for thousands of in-stock items;1-2 weeks for non-stock items.
Q4. What's your incoterms?
EXW,FOB,CIF,CFR.
Q5. What's your terms of payment?
T/T 100% in advance.
Q6.What certificate do you have for your products?
Our products are compliant with RoHS, REACH.
Q7: Can you make the plastic or rubber parts in different colors and shapes?
Yes, we are glad to provide the parts in different colors to meet the customer's requirement. For custom parts, please contact the sales to get more detailed reply.
