Audited Supplier
CDM-8024
PP
5%
PP
Drawing, Injection
<300 G/10min (190 C/10.0kg)
0.91-0.92
<0.15 %
5
5
4
5
Chuangda
25kg Kraft Bag
95% PP masterbatch
China
3902100090
Product Description
PP Master-batch With Black color For Wire Drawing
PP Master-Batch with Black Color Technical parameter:
Package: 25kgs Kraft Bags
Technical Specification: SGS Certificate
Applications of black masterbatch:
1. PE/PP Injection Molding (Box, Containers, Chairs, Crates, Buckets, Battery, cases, Hangers, etc.)
2. PE/PP Extrusion Molding (Sheet, Pipe, Wire & Cable, etc.)
3. PE Blow Molding (Medical & Cosmetic container, Lubricant & Paint container, etc)
4. PE Film (shopping bags, casting film, multilayer film, etc.)
5. PE Fiber (Carpet, Textiles, Upholstery, etc.)
FAQ:
Q1. How to use masterbatch?
A: just mix up with the resin granules according to the dosage ratio under appropriate temperature.
Q2. The difference between the general use and the special purpose masterbatches?
1: Special purpose masterbatch: used as the same material as carrier. For example, PE products often use master batches based on PE.
2: General use masterbatch: Use one resin as carrier, but also can be used for coloring other resins.
In general, it's easy to use this masterbatch but there are some shortcomings:
A. Poor predictability of the color.
The final color changes according to the change of resin.
B. Affect other characters of plastic products.
Especially the hardness of products for it's easy to be deformed and distorted, especially for engineering plastic
C. Higher cost
General use masterbatches often use pigments which have higher heat resistance grade and higher cost.
Q3. How long the masterbatch could be stored?
A : If stored under a dry and cool environment, the quality of masterbatches will not change even after a long period of store, for the pigments fixed on the carrier resin which stay in a closed state.
Q4. Does the masterbatch need to be dried before use?
A : In general it can be used directly except ABS and some expecial masterbatches mentioned, which should be dried according to common method.
Q5. Does the masterbatches influence the property of products?
A : Some pigments have effect on flame resistance. It should be mentioned as first if is used for flame resistance products.
Q6. Does the mould have an effect on masterbatches?
A : If ask for a smooth surface, Good quality mould is needed.
Q7. Do you accept Credit Card, Visa, Paypal,etc. payment?
A : Payment terms is FOB SHANGHAI, LIANYUNGANG port, by TT (30% deposit), balance against the copy of B/L or L/C at sight.
Q8. Will the color of masterbatches fade?
A : Absolutely not.
Q9. Besides coloring, does the masterbatches have flame resistant, brightening, anti-static, anti-oxidation , anti-ultraviolet functions?
A : According to the application of products, like brightener, we could make it according to your requirements
Tags:Filler Masterbatch,Black Masterbatch,Injection Masterbatch
PP Master-Batch with Black Color Technical parameter:
| ITEMS | Nominal Value Unit |
| Specific Gravity | 0.91~0.92 |
| Melt Mass-Flow Rate(MFR)(190ºC/10.0kg) | <300 g/10min |
| PP Content | 95 % |
| Moisture Content | <0.15 % |
| PP wax | 5% |
| Melting Point | 120-150ºC |
| Mobility Resistance | 5 |
| Light Fastness | 5 |
| Migration Resistance | 4 |
| Heat Resistance | 5 |
| Add Ratio | 2%-10% |
| Standard Reference | Pantone |
Package: 25kgs Kraft Bags
Technical Specification: SGS Certificate
Applications of black masterbatch:
1. PE/PP Injection Molding (Box, Containers, Chairs, Crates, Buckets, Battery, cases, Hangers, etc.)
2. PE/PP Extrusion Molding (Sheet, Pipe, Wire & Cable, etc.)
3. PE Blow Molding (Medical & Cosmetic container, Lubricant & Paint container, etc)
4. PE Film (shopping bags, casting film, multilayer film, etc.)
5. PE Fiber (Carpet, Textiles, Upholstery, etc.)
FAQ:
Q1. How to use masterbatch?
A: just mix up with the resin granules according to the dosage ratio under appropriate temperature.
Q2. The difference between the general use and the special purpose masterbatches?
1: Special purpose masterbatch: used as the same material as carrier. For example, PE products often use master batches based on PE.
2: General use masterbatch: Use one resin as carrier, but also can be used for coloring other resins.
In general, it's easy to use this masterbatch but there are some shortcomings:
A. Poor predictability of the color.
The final color changes according to the change of resin.
B. Affect other characters of plastic products.
Especially the hardness of products for it's easy to be deformed and distorted, especially for engineering plastic
C. Higher cost
General use masterbatches often use pigments which have higher heat resistance grade and higher cost.
Q3. How long the masterbatch could be stored?
A : If stored under a dry and cool environment, the quality of masterbatches will not change even after a long period of store, for the pigments fixed on the carrier resin which stay in a closed state.
Q4. Does the masterbatch need to be dried before use?
A : In general it can be used directly except ABS and some expecial masterbatches mentioned, which should be dried according to common method.
Q5. Does the masterbatches influence the property of products?
A : Some pigments have effect on flame resistance. It should be mentioned as first if is used for flame resistance products.
Q6. Does the mould have an effect on masterbatches?
A : If ask for a smooth surface, Good quality mould is needed.
Q7. Do you accept Credit Card, Visa, Paypal,etc. payment?
A : Payment terms is FOB SHANGHAI, LIANYUNGANG port, by TT (30% deposit), balance against the copy of B/L or L/C at sight.
Q8. Will the color of masterbatches fade?
A : Absolutely not.
Q9. Besides coloring, does the masterbatches have flame resistant, brightening, anti-static, anti-oxidation , anti-ultraviolet functions?
A : According to the application of products, like brightener, we could make it according to your requirements
Tags:Filler Masterbatch,Black Masterbatch,Injection Masterbatch
