Audited Supplier
RP-346R
Low Crystallinity
9003-07-0
(C3h6)N
Polypropylene
Polypropylene/PP
General Plastics
Thermoplastic Plastics
Injection
Transparent
PP-R
High Transparent
High Gloss
Low Warpage
Good Colorability
CHINA
Bag
BAG/25KG
China
Product Description
| Performance Testing method unit numerical value |
| Melt mass flow rate(230ºC2.16kg) ISO 1133 1 g/10min 25 |
| density ISO 1183 1 g/cm³ 0.9 |
| Tensile yield stress ISO 527-2 Mpa 29 |
| Tensile yield strain ISO 527-2 % 14 |
| Flexural modulus ISO 178 Mpa 1150 |
| Notched impact strength(23ºC) ISO 180/IA KJ/m² 6.0 |
| Rockwell hardness ASTM D785 R scale |
| Load deformation temperature(0.45Mpa) ISO 75 2/B ºC 78 |
| Haze ASTM MA1703 1 % 9 |
| Glossiness ASTM MA1702 1 85 |
| (1) Typical value: Not a product specification |
| Recommended processing temperature |
| Melting temperature ºC |
Ethylene content 2.9-3.5% general purpose injectable transparent wide-mouth cup, bottle, extrusion-blowing hollow, bucket, etc. Characteristics: high transparency, low warpage, high gloss. Uses: plastic bottles, plastic buckets, plastic cups.
Thin film products: Polypropylene thin film products are transparent and glossy, with low permeability to water vapor and air. They are divided into films, cast films (CPP), biaxially oriented films (BOPP), etc.
Injection molded products: Can be used in automobile, electrical, mechanical, instrument, wireless point, textile, defense and other engineering accessories, daily necessities turnover boxes, medical devices, building materials.
Extruded products: can be used for pipes, profiles, monofilaments, fishing ropes, strapping tapes, binding ropes, woven bags fibers, composite coatings, and sheets.
Others: low foaming, calcium plastic board, synthetic wood, plywood, synthetic paper, high foaming can be used as structural foam
