Audited Supplier
WS001
One Year
PPR Pipe
Single-screw
Automatic
Computerized
CE, ISO9001:2008
Non-Customized
New
7*24 Hours
20-60days
ABB/Omron
Wn
Customizable
380V/50Hz or Other
1 Year
WINSOAR
Seaworthy Packing
16-160mm
China
8477209000
Product Description
The single screw extruder is simple in design and inexpensive, so it is widely used. It is suitable for extrusion production of PE, PPR, PERT plastic pipes, sheets and profiles.
After compaction, melting, mixing and homogenization of PE the subsequent material is pushed to the die by the screw,The extrusion die is the most important part of tube forming.
The extruder is especially widely used on pipe production line to co-extrude pipe mark line.It is specially designed with lower power consumption and takes smaller space.
Used for shaping and cooling of pipes, it is equipped with a vacuum system, water circulation system, as well as front and rear moving device and left and right, height adjustment manual device, stainless steel box, circulating water spray cooling.
The cooling water is atomized and sprayed from the special nozzle after being pressed by the water pump, so that the product can be cool to 360 degrees in all directions.
It is used to continuously and automatically lead out the cooled and hardened pipes from the machine head, and the speed is controlled by frequency conversion.
After being controlled by encoder according to the required length, automatic cutting is carried out, the stacker is turned over with a delay, pipes are cutted smoothly without scraps and dust.
This machine is equipped with two reels alternately to ensure the continuity of production. It is suitable for plastic rewinding and packaging, automatic arranging, automatic rewinding, and easy operation.
Accept finished products and automatically turn over.
All Rights Reserved@ Winsoar Science& Technology Development Co., Ltd.
