Audited Supplier
18FWS125V2D
0
Passive
No
Plastic
Stage
CE, RoHS, FCC
2000 W
4000 W
5''vc Copper in/out
34 ~ 1000Hz
97.4dB
8 Ohm
Ferrite
Aluminium
CI
Carton
485 x 485 x 265 mm
China
8518290000
Product Description
Pro Audio 18 Inch Professional Subwoofer 4000Watt DJ System Speaker.
GENERAL SPECIFICATIONS
SMALL SIGNAL PARAMETERS
SHIPPING INFORMATION
- 5 INCH COPPER VOICE COIL
- 97.4 dB/SPL SENSITIVITY
- 4000 WATT PROGRAM POWER HANDING
- FEM OPTIMIZED MOTOR AND SUSPENSIONS
- 52mm PEAK TO PEAK MAXIMUM EXCURSION
- OPTIMIZED COOLING SYSTEM
- DOUBLE SPIDER
- RESONANCE FREE AND HEAVY DUTY BASKET DESIGN
- TRIPLE ROLL SURROUND
GENERAL SPECIFICATIONS
| Nominal diameter | mm (in.) | 461(18) |
| Nominal impedance | Ω | 8 |
| Minimum impedance | Ω | 7.9 |
| Program power (1) | W | 4000 |
| AES Power rating(2) | W | 2000 |
| Sensitivity (3) | dB | 97.4 |
| Frequency range | Hz | 34 ~ 1000 |
| Voice coil diameter | mm (in.) | 125(5) |
| Chassis material | Aluminium | |
| Magnet material | Ferrite | |
| Magnet dimensions (ODxIDxh) | mm | 280 x 140 x 25 2pcs |
| Coil material | SV | |
| Former material | Glass Fiber | |
| Xmax(4) | mm | 17.5 |
| Xmech(5) | mm | 26 |
| Gap height | mm | 14 |
| Voice coil Wingding height | mm | 42 |
SMALL SIGNAL PARAMETERS
| DC resistance | Re | Ohm | 6 |
| Resonance frequency | Fs | Hz | 34 |
| Moving mass | Mms | g | 279 |
| Compliance | Cms | mm/N | 0.08 |
| Force factor | BL | N/A | 30.1 |
| Mechanical Q-factor | Qms | 7.9 | |
| Electrical Q-factor | Qes | 0.37 | |
| Total Q-factor | Qts | 0.35 | |
| Equivalent air volume | Vas | I | 226 |
| Voice coil Inductance | Le | mH | 2.9 |
| Diaphragm area | Sd | cm² | 1325 |
| Reference efficiency | Eta 0 | % | 2.9 |
SHIPPING INFORMATION
| Net weight | Kg | 25.7 |
| Multipack size (1) (W x D x H) | mm | 485 x 485 x 265 |
| Multipack weight | Kg | 27.7 |
Quality Assurance
Since the raw material sent in untill the speaker sent out, every aspect of them will be fully checked.
We have many advanced test equipments to measure the quality of products. No defectives will be send out.
Our company have a nice quality control managing system(QC) that have strict management of products and staffs.
FAQ
1.Q: Are you a factory or trading company?
A: We are a manufacturer with our own factory ,we have more than 15 years experience.
2.Q: Can you do OEM and ODM?
A: Yes, both. We can put your idea into products.
3. How many days do you need to prepare the goods?
We need about 20-25 working days for large order.
