Audited Supplier
Gas Mask
PP Non-Woven Fabric
White
Safe-Type
Plane Mask
sano
Carton
length: 500-1000m/roll
Huzhou
5603129000
Product Description
company introduction
Huzhou sen nuo fluorine material technology co., LTD. Is a company specializing in the production of bulk ptfe microporous membrane and the related composite products of high-tech enterprises, the company is located in northern zhejiang province, east of Shanghai Hangzhou in the south, the west according to the taihu lake in the north, and wuxi Suzhou on the other side of the lake, lake is the only ring taihu area because of the name of the city, the transportation is convenient.
parameters
Huzhou Senuo Fluorine Material Technology Co., Ltd. successfully applied extruded polytetrafluoroethylene (e-PTFE) microporous membrane to the production of masks, which can replace melt-blown cloth and can withstand procedures such as washing and disinfection, and can be used repeatedly.
Different from the electrostatic filtration principle of melt spraying cloth, Huzhou Senuo Fluorine's expanded polytetrafluoroethylene (e-PTFE) microporous membrane adopts physical isolation. The e-PTFE microporous membrane is a thin membrane, formed by a certain process of polytetrafluoroethylene (PTFE) resin. There are many tiny holes in the membrane, which can be used as excellent filtration material by covering the fabric and substrate.
Observed and tested by scientific instruments, these micropores are distributed uniformly, the pore diameter is about 100 times smaller than that of meltblown cloth, and the porosity is more than 80%. At the same time, it has good air permeability and excellent filtration efficiency.
Today, the mask has been tested by the national authority, and the result shows that the filtration efficiency reaches 99.2% (N95, KN95 mask level), and the exhalation and inhalation resistance are far below the standard limit, which can effectively achieve air permeability,a good effect of impermeable to water and filter PM2. 5, to resist the good effect of microorganisms and bacteria into the body.
Previously, PTFE is a material that can be used in biomedicine, artificial blood vessels, and the like. It has no biological toxicity and is a new generation of environmentally friendly product. Therefore, it is safer to be used on mask. It is worth mentioning that PTFE can withstand sterilization methods such as boiling water, alcohol, and 84 disinfectant solution. In the case of a shortage of mask, if the mask is normally worn without damage, it can be used again after disinfection.
Q & A
1: Delivery Time
-Sample Order: 7-15days after receipt of the full payment.
-Stock Order: 7-15days after receipt of the full payment
-OEM Order: 15-300days after receipt of the deposit.
2 .Payment
T/T, Western Union, LC
3. Transportation
Transported by DHL, UPS, EMS, Fedex,Air freight. sea freight.
Huzhou sen nuo fluorine material technology co., LTD. Is a company specializing in the production of bulk ptfe microporous membrane and the related composite products of high-tech enterprises, the company is located in northern zhejiang province, east of Shanghai Hangzhou in the south, the west according to the taihu lake in the north, and wuxi Suzhou on the other side of the lake, lake is the only ring taihu area because of the name of the city, the transportation is convenient.
parameters
Huzhou Senuo Fluorine Material Technology Co., Ltd. successfully applied extruded polytetrafluoroethylene (e-PTFE) microporous membrane to the production of masks, which can replace melt-blown cloth and can withstand procedures such as washing and disinfection, and can be used repeatedly.
Different from the electrostatic filtration principle of melt spraying cloth, Huzhou Senuo Fluorine's expanded polytetrafluoroethylene (e-PTFE) microporous membrane adopts physical isolation. The e-PTFE microporous membrane is a thin membrane, formed by a certain process of polytetrafluoroethylene (PTFE) resin. There are many tiny holes in the membrane, which can be used as excellent filtration material by covering the fabric and substrate.
Observed and tested by scientific instruments, these micropores are distributed uniformly, the pore diameter is about 100 times smaller than that of meltblown cloth, and the porosity is more than 80%. At the same time, it has good air permeability and excellent filtration efficiency.
Today, the mask has been tested by the national authority, and the result shows that the filtration efficiency reaches 99.2% (N95, KN95 mask level), and the exhalation and inhalation resistance are far below the standard limit, which can effectively achieve air permeability,a good effect of impermeable to water and filter PM2. 5, to resist the good effect of microorganisms and bacteria into the body.
Previously, PTFE is a material that can be used in biomedicine, artificial blood vessels, and the like. It has no biological toxicity and is a new generation of environmentally friendly product. Therefore, it is safer to be used on mask. It is worth mentioning that PTFE can withstand sterilization methods such as boiling water, alcohol, and 84 disinfectant solution. In the case of a shortage of mask, if the mask is normally worn without damage, it can be used again after disinfection.
Q & A
1: Delivery Time
-Sample Order: 7-15days after receipt of the full payment.
-Stock Order: 7-15days after receipt of the full payment
-OEM Order: 15-300days after receipt of the deposit.
2 .Payment
T/T, Western Union, LC
3. Transportation
Transported by DHL, UPS, EMS, Fedex,Air freight. sea freight.
