Audited Supplier
HiGlue 55 Pipe Thread Sealing Cord
Thread Sealing Cord - immediate full pressure sealing. Allows reliable re-adjustments.
Fast Easy Clean Reliable Save Money
Product description
Higlue 55 Thread sealing cord is a new, faster, more versatile pipe sealant which out-dates traditional tapes and hemp/paste combinations. It instantly seals (irrespective of ambient temperature) domestic and industrial pipe systems during assembly. Can be safely and confidently used with drinking or waste water (hot or cold), gas, compressed air, and industrial oils. Supplied in a handy, pocket sized, protective container complete with built in cutter. WRC listed for use with potable water.
- General purpose, threaded pipe and fitting sealant
- For a quick, easy and reliable seal
- Non-curing, immediate, full-pressure seal
- Tested in accordance with EN 751-2 Class ARp and DIN 30660
- DVGW/KTW approval for gas and potable water
- Certified to NSF/ANSI, Standard 61
| Agency approvals / certificates / specifications | DVGW, KTW, NSF |
| Color | White |
| Operating temperature | -55.0 - 150.0 °C (-65.0 - 300.0 °F ) |
Composition: Polyamide thread with inert proprietary paste
Appearance : White color, coated wet cord
Application :
Use for Gas ,LPG ,pipelines ,valve installing. Industrial ,Public and house 'pipeline system
( cold water ,hot water ,heating ,potable -water) . Industrial production (pump, valve , pipe joints etc)
Usage:
1. Thread must be cleaned by brush , then wind onto the thread following the direct of the thread
2. Turns: Refer to the form , if it's used to the plastic pipe ,30% of the turns added will be recommended regardless the space of the thread Cut the string direct by the edge of the packing
3. It's very useful when adjust loosen or tighten disassemble and wind up
How to use:1)Roughen the thread with saw-blade or file.
2)Wind onto one of the first pitches of the thread following the thread direction.
3)Cut the HiGlue 55 sealing cord with the incorporated cutting device and press the loose end onto the thread.
4)Screw on and fasten the joint with a pipe wrench. Reposition if necessary.
1, Q: Are you factory or trading company?
A: We are factory which have 20 years of experience, and provide you direct prices.
2, Q: Can I be your agent?
A: Sure, we are looking for agent all over the world.
3, Q: Can I get a sample before mass production?
A: Of course! FREE SAMPLE, after you confirm, when we will start production.
4, Q: How long can I got this sample?
A: Normally 5-10 days after receiving your Freight.
5, Q: How about the quality grantee period?
A: One year.
6, Q: When can I get the quotation for my enquiry?
A: Usually the quotation will be sent to you within one working day upon all.
7, Q: If I am not satisfied with the products, when I get it, what should I do?
A: If not satisfied it, please feel free to contact salesman soon, we will provide you the solution ASAP.
