Audited Supplier
H000
EPDM FPM
PVC Pipe Fittings
Shaft Seal
High Pressure
O-Ring
Standard
Flange
Bsw, JIS, ANSI, GB, DIN, GOST
Press
Circle
xita
Cartons
15-400mm
Changzhou, Jiangsu
3917400000
Product Description
PVC FLANGE SEALING GASKET EPM/FPM
| Test Project | Material | EPDM | |||
| Standard Value | Test Value | Test Method | |||
| Physical Performance | Hardness(Shore A)ºC | 65±5 | 64 | OK | GB/T531-2008 |
| Tensile Strength,Minimum,MPa | 9 | 12 | OK | GB/T528-2009 | |
| Tensile Yield,Minimum,% | 300 | 460 | OK | GB/T528-2009 | |
| Heat resistance experiment | Test Condition 70ºC*70H | ||||
| Hardness Change,ºC | 0- +10 | 4 | OK | GB/T3512-2001 | |
| Tensile Strength Change Rate,Maximum,(%) | -25 | -13 | OK | ||
| Tensile Yield Change Rate,Maximum,(%) | -35 | -25 | OK | ||
| Compression Test | Test Condition 70ºC*72H | ||||
| Compression Permanent Deformation,Maximum (%) | 35 | 25 | OK | GB/T7759-1996 | |
| Cold Resistance Test | Brittleness Temperature | -40 | -40 | OK | GB/T1682-1994 |
| Conclusion | OK | Test | |||
| Flange Gasket EPDM / FPM | |||||||
| Size DN(De) | Dimension(mm) | ||||||
| D0 | D1 | D2 | da | H | L | n | |
| 15(20) | 93.00 | 16.00 | 65.00 | 14.00 | 3.00 | 115.00 | 4 |
| 20(25) | 103.00 | 21.00 | 75.00 | 14.00 | 3.00 | 125.00 | 4 |
| 25(32) | 113.00 | 28.00 | 85.00 | 14.00 | 3.00 | 135.00 | 4 |
| 32(40) | 138.00 | 36.00 | 100.00 | 18.00 | 3.00 | 160.00 | 4 |
| 40(50) | 148.00 | 45.00 | 110.00 | 18.00 | 3.00 | 170.00 | 4 |
| 50(63) | 163.00 | 57.00 | 125.00 | 18.00 | 3.00 | 185.00 | 4 |
| 65(75) | 183.00 | 69.00 | 145.00 | 18.00 | 3.00 | 205.00 | 4 |
| 80(90) | 198.00 | 83.00 | 160.00 | 18.00 | 3.00 | 220.00 | 8 |
| 100(110) | 218.00 | 103.00 | 180.00 | 18.00 | 3.00 | 250.00 | 8 |
| De125 | 248.00 | 117.00 | 210.00 | 18.00 | 3.00 | 280.00 | 8 |
| 125(140) | 248.00 | 131.50 | 210.00 | 18.00 | 3.00 | 280.00 | 8 |
| 150(160) | 283.00 | 151.00 | 240.00 | 22.00 | 3.00 | 315.00 | 8 |
| De180 | 283.00 | 166.00 | 240.00 | 22.00 | 3.00 | 315.00 | 8 |
| De200 | 338.00 | 190.00 | 295.00 | 22.00 | 3.00 | 370.00 | 8 |
| 200(225) | 338.00 | 203.00 | 295.00 | 22.00 | 3.00 | 370.00 | 8 |
| De250 | 393.00 | 239.50 | 350.00 | 22.00 | 3.00 | 430.00 | 12 |
| 300(315) | 443.00 | 302.00 | 400.00 | 22.00 | 3.00 | 485.00 | 12 |
| 350(355) | 500.00 | 320.00 | 450.00 | 22.00 | 3.00 | 550.00 | 16 |
| 400(400) | 550.00 | 350.00 | 500.00 | 22.00 | 3.00 | 590.00 | 16 |
Adavantages
1. High quality with reasonable price
2. Oven test no sign of bubble or cracks
3. Simple installation and Good electrical insulation
4. Water quality unaffected and Small resistance to fluidity
5. Rustless, oxidation-resistant, anti-corrosion and environment-friendly
Changzhou Xita Plastic Co., Ltd is a professional supplier of UPVC/CPVC/PE/PPR Pipes, pipe fittings, valves. Plastic piping systems such as pipes, fittings and valves is widely used in water supply, chemical industry, water treatment, environmental protection, pharmaceutical area etc.
We insist in the principal of ""Quality First, Clients First". Your satisfaction is our eternal pursuit. We Strictly follows ISO9001 quality system to arrange manufacturing. With high-class raw material, strict quality control in both the workshop and laboratory with various professional testing equipment, Xita Plastic ensures that every single product meets the corresponding inspection standard.
We could provide products as follows:
1. PVC pipe fittings-Cement PN10: 20mm~400mm
2. PVC pipe fittings-rubber ring fittings PN10: 63mm~355mm
3. PVC pipe fittings-Cement PN16: DN15~DN200
4. PVC Valves: Ball valves, true union valves, butterfly valves, check valves, bottom valves, Y strainers
5. PPR pipe fittings
6. PE pipe and fittings
7. Distribution: Drier for injecion machines; PVC/PE foam tapes for sealing; PET tapes
Our sales staff is experienced in plastic piping area for 9 years. We will give you suggestions for your better choice.
"Xita Plastic" warmly welcomes friends and clients all over the world for further cooperation.
