| Item# | Inflated Size | Person Capacity | MAX Load | chamber material | cover material |
| IK290P-DB | 290 x 100 cm 9'6" x 39" | 1 | 120 kgs 264 lbs | PVC | Polyester |
| IK290N-Y | 290 x 100 cm 9'6" x 39" | 1 | 120 kgs 264 lbs | PVC | Nylon |
| IK310N-LB | 310 X 100 cm 10' x39'' | 2 | 200 kgs 440 lbs | PVC | Nylon |
| IKC310P-R | 310 X 100 cm 10' x39'' | 2 | 200 kgs 440 lbs | PVC | Polyester |
| IKC330N-B/W | 330 x 95 cm 10'10'' x 37'' | 2 | 220 kgs 485 lbs | PVC | Nylon |
| IKC330NHC-B | 330 x 95 cm 10'10'' x 37'' | 2 | 220 kgs 485 lbs | PVC | Nylon honeycomb structure |
| IKC335N-B/R | 330 x 95 cm 10'10'' x 37'' | 2 | 220 kgs 485 lbs | PVC | Nylon |
| IKC335N-P | 330 x 95 cm 10'10'' x 37'' | 2 | 220 kgs 485 lbs | PVC | Nylon |
| IKC335N-B/G | 335 x 95 cm 11' x 37'' | 2 | 220 kgs 485 lbs | PVC | Nylon |
| IKC410N-B/G | 410 x 95 cm 13'5'' x 37'' | 3 | 270 kgs 600 lbs | PVC | Nylon |
| IKC410NHC-R/Y | 410 x 95 cm 13'5'' x 37'' | 3 | 270 kgs 600 lbs | PVC | Nylon honeycomb structure |
| IKC330N-G | 330 x 95 cm 10'10'' x 37'' | 2 | 220 kgs 485 lbs | PVC | Nylon |
| IKC330N-Y | 330 x 95 cm 10'10'' x 37'' | 2 | 220 kgs 485 lbs | PVC | Nylon |






Standard Accessory Included

Popular Inflatable Kayak

Our workshop

Instruction and Storage for Kayak
About Air Pressure
The correct pressure for this item is 0.1 bar / 1.5 PSI. Do not exceed this pressure.
Please check the pressure with the supplied pressure gauge.
If you are overpressure, please deflate until you reach the recommended pressure.
Under hot sun
If you leave your product exposed to the hot sun, please check the pressure and deflate it slightly, otherwise, the material might be overstretched.
About Storage
Deflate the products, fold the 2 sides into the middle, then roll it up from the opposite end of the valves (so remaining air can escape from the valves), then you can pack into the carry bag.
Store it in a clean and dry place that is not affected by major variations in temperature and other damaging factors.
The important is to make sure it is well cleaned and completely dry before you pack away.
FAQ
1. What is the warranty of your products?
Our warranty is 1 year, including spare parts.
It will take 7-10 working days to finish a sample.
5. Can you provide OEM/ODM service?
Yes, we work on both OEM and ODM orders. Your designs and idea are warmly welcomed.








Audited Supplier









