Audited Supplier
Automotive manufacturing: fuel pipes, corrugated pipes, ignition cables, heating cables, etc.
Electrical and electronic industries: chip carriers, thermocouples,etc.
Semiconductor industry: trough and piping systems, etc.
Chemical and water treatment industries: filter membranes, filters, chemical anticorrosive piping system (Pipes, fittings, pumps, valves), etc.
New energy fields: ion exchange membranes, lithium battery adhesives, large solar panels, etc.
Industrial automation: heat exchangers, heat shrink tubes, water pipe connectors, etc.
Building industry:protective films for buildings, wires and optical cables for partitions, etc.
PVDF has high toughness, low friction coefficient, strong corrosion resistance, good aging resistance, weather resistance, and good radiation resistance in fluorine resin.
| Physical Properties | Unit | |
| Relative Density | g/cm3 | 1.75-1.79 |
| Melt Flow Rate | g/10 min | above 15 |
| Melting Point | ºC | 165±5 |
| Mechanical Properties | Unit | |
| Tensile Strength | Mpa | ≥30 |
| Elongation at Break | % | 0-100 |
| Shore hardness | Shore | 70 |
| Yield Strength | Mpa | - |
| Coefficient of Friction | - | 0.3 |
| Thermal Properties | Unit | |
| Continuous Use Temperature | ºC | 125 |
| Heat Deflection Temperature | ºC(1.82Mpa) | 100 |
| Coefficient of Thermal Expansion | (-10x(-5)ºC) | 7-14 |
| Electrical Properties | Unit | |
| Volume Resistivity | Ω.cm | 10(15) |
| Dielectric Strength | KV(3.2mm thickness) | 12 |
| Relative Permittivity | 10(3)HZ | 7 |
| Dielectric Loss Tangent | 10(6)HZ | <0.1 |
Please dry at 120ºC for 2 hours before production.
The equipment used for this product must be cleaned and free of any residues.
This product is only suitable for industrial use. If used for other purposes, its safety cannot be guaranteed.
