Audited Supplier
LHG-250G Filter Media with 60mm
without Clapboard
0
Fiberglass
G3
Pre Filter
Panel Filter
Fiber Layer
Green and White
15
3200-3600G/M2
50/60mm
Vittofilter
Standard Export Packing
as Per Customer's Requirement
Zhongshan,Guangdong,China
701939
Product Description
This filter is able to absorb the dissociation paint particles completely and keep the discharged air clean and the air circulated in the spray booths becomes much purer. Raplacing the filter timely can avoid the paint particle block and prevent the danger caused by the high pressures in the spray booth
Weight: 250gr/sqm
Thickness: 60mm
Air velocity: 1.20m/sec
Air flow rate: 43, 20m³ /h
Initial resistance: 13PA
Final resistance: 250PA
Medium arrestance: 67.60%
Dust holding: 3, 540gr/sqm
Maximum temperature: 350° C
Flame resistance: F-1 DIN 53438
Paint Stop,Spray Booth Filter, Fiberglass Air Filters
Speciality:
1. Fiberglass filter media is made of long fiberglass in non-woven way, large ventilation quantity, small resistance, good efficiency of the dust arrestance for the over-spray.
2. It is applied to the superficial spray coating high quality painting-spray filtration, high dust catching for PA-50/60/PA-100, especially suitable for using heat recovery system;
3. High strength fiberglass increasing structure; the windward side is green, the leeward side is white;
4. The low compression preformance maintains its outlook, which is completely useful for the filtration fiber to keep the oil mist and the dust;
5. Nonflammability, temperature resistance at 170°C;
6. The compression packing may save the fare and the storage in the transportation. After decompression, it will regain its original condition;
7. Outer frame may choose the paper frame, the falvanization iron frame, or aluminium alloy frame.
Functions:
1.Main application to the auto electrophoretic paint filter and the fire-resistant steel casting plant for the flue gas dust removal processing system;
2.Used for the explosion grinding bag dust collector in the blast furnace and cement plant.
Performance parameters:
Weight: 250gr/sqm
Thickness: 60mm
Air velocity: 1.20m/sec
Air flow rate: 43, 20m³ /h
Initial resistance: 13PA
Final resistance: 250PA
Medium arrestance: 67.60%
Dust holding: 3, 540gr/sqm
Maximum temperature: 350° C
Flame resistance: F-1 DIN 53438
Paint Stop,Spray Booth Filter, Fiberglass Air Filters
Speciality:
1. Fiberglass filter media is made of long fiberglass in non-woven way, large ventilation quantity, small resistance, good efficiency of the dust arrestance for the over-spray.
2. It is applied to the superficial spray coating high quality painting-spray filtration, high dust catching for PA-50/60/PA-100, especially suitable for using heat recovery system;
3. High strength fiberglass increasing structure; the windward side is green, the leeward side is white;
4. The low compression preformance maintains its outlook, which is completely useful for the filtration fiber to keep the oil mist and the dust;
5. Nonflammability, temperature resistance at 170°C;
6. The compression packing may save the fare and the storage in the transportation. After decompression, it will regain its original condition;
7. Outer frame may choose the paper frame, the falvanization iron frame, or aluminium alloy frame.
Functions:
1.Main application to the auto electrophoretic paint filter and the fire-resistant steel casting plant for the flue gas dust removal processing system;
2.Used for the explosion grinding bag dust collector in the blast furnace and cement plant.
Performance parameters:
Model | LH/PA-50/60 | LH/PA-100 |
Average arrestance | 92%-96% | 97%-99% |
Initial pressure drop | 15Pa | 20Pa |
Final pressure drop | 250 Pa | 280 Pa |
Air velocity | 0.7-1.5.m/s | 0.7-1.75.m/s |
Dust holding at final | 3200-3600g/m2 | 3600-4900g/m2 |
Temperature resistance | 170°C | 170°C |
Temperature short peaks | 190°C | 190°C |
Normal thickness | 50/60mm | 100mm |
Normal size | 0.8m*20 1.0m*20m 2.0m*20m | 0.8m*20 1.0m*20m 2.0m*20m |
