Audited Supplier
ZS-Door
18 Months
18 Months
New
Automatic
CNC
Customized
Cr12 with Hard Treatment
12
50
9.5
0.6-1.0
Chain
Omron
Delta
35m/Min
1-2
Plastic Coating Loading by Container
5.5m*1.2m*1.4m
China, Cangzhou
84552210
Product Description
Automatic Roller Shutter Door Roll Forming Machine
it is made up of uncoiler , feeding part, main roll forming system ,cutting system and receive table.
The production of shutter door machine are widely used in the production of various industrial plants, warehouses and supermarkets, shopping malls shutter doors.
Roll Forming Machine Components:
No. | Name | Qty |
1 | De-coiler | 1 Set |
2 | Main roll forming system | 1 Set |
3 | Hydraulic pump system | 1 Set |
| 4 | PLC control system | 1 Set |
| 5 | Receive table | 1 Set |
We can customized all design follow with your requirment:
Feeding Guide Device
The feeding guide device at the main entrance of the machine during work,Raw materials on both sides of the plate the enter into the machine by the guiding device,make the raw materials and roll forming system to maintain the correct position.The guiding position can be adjusted by the manual screw mechanism,and the feeding guide width can be adjusted independently
The feeding guide device at the main entrance of the machine during work,Raw materials on both sides of the plate the enter into the machine by the guiding device,make the raw materials and roll forming system to maintain the correct position.The guiding position can be adjusted by the manual screw mechanism,and the feeding guide width can be adjusted independently
Rolling Forming System
Forming mold: GCr15 molding steel, through vacuum quenching heat treatment to HRC60-62 °then grinding the inner
Hole and the end face. The precision machining roller surface with CNC lathe
Shafts material:40Cr steel,CNC lathes,Heat Treatment,hard Chrome Coated
With thickness 0.04mm,surface with mirror treatment(for longer life and anti-rust)
Main motor and 14 reducers combination driving,about 12-step to form
Main Motor =5.5KW,Frequency speed control
Forming mold: GCr15 molding steel, through vacuum quenching heat treatment to HRC60-62 °then grinding the inner
Hole and the end face. The precision machining roller surface with CNC lathe
Shafts material:40Cr steel,CNC lathes,Heat Treatment,hard Chrome Coated
With thickness 0.04mm,surface with mirror treatment(for longer life and anti-rust)
Main motor and 14 reducers combination driving,about 12-step to form
Main Motor =5.5KW,Frequency speed control
Hydraulic Cutting And Punching Device
Cutter stype:Mold cutting
The length of tolerance:±1.0mm(3m)
Cutter motor:Hydraulic
Servo motor power:4KW
Cutter stype:Mold cutting
The length of tolerance:±1.0mm(3m)
Cutter motor:Hydraulic
Servo motor power:4KW
