Audited Supplier
a Lifetime
1 Year
CE
New
Non-Customized
Automatic
Block Assembly
20mm
40:1
Electrical Heating/8 Zones
350
480 R/Min
Air Compression
1 -15 Kg/ Hr
Hapro
Plywood
China
9024800000
Product Description
Parallel twin screw extrusion unit (co- rotating), widely used in rubber and engineering resin blends, dispersion, modification, enhancement, chlorinated polypropylene and high water absorbing resin devolatilization, Biodegradable master batch,polycondensation of polyamide, polyurethane addition polymerization reaction extrusion; carbon powder, magnetic powder pelletizing; cable insulation material, sheath material,low smoke and low halogen flame retardant PVC cable and all kinds of silane cross-linking material preparation, etc. Dedicated to the extrusion forming process, for example the pelletizing experiment.
Parallel Twin-screw platform is consist of the Drive device, Feeding device, Barrel ,Twin-screw and Dies parts, etc. The Twin-screw is the heart of the extruder, divided into the charging section (solid conveying zone), compression section(melting zone) and the homogenization section (the melt conveying zone) three parts. Put the material into the hopper ,under the action of a rotating screw, material was pushed on to direction of the nose. Material endures strong shear, mixing and calendaring in the barrel, In this process, Meanwhile, the physical states of material the evolve from glass state to the high elastic state ,eventually become sticky flow pattern .
Parallel Twin-screw platform is consist of the Drive device, Feeding device, Barrel ,Twin-screw and Dies parts, etc. The Twin-screw is the heart of the extruder, divided into the charging section (solid conveying zone), compression section(melting zone) and the homogenization section (the melt conveying zone) three parts. Put the material into the hopper ,under the action of a rotating screw, material was pushed on to direction of the nose. Material endures strong shear, mixing and calendaring in the barrel, In this process, Meanwhile, the physical states of material the evolve from glass state to the high elastic state ,eventually become sticky flow pattern .
- Technical parameters:
Parallel twin screw extrusion unit (co- rotating) Screw Diameter 20 mm Cooling Air Compression Deep of Screw Slot 3.5 mm Exhaust Vacuum Screw L:D 40:1 Pressure range 0~100 Mpa Screw material Available Pressure sensor Import Temp control system RKC from Japan Feeding speed Manual adjustment Temp sensor J type thermocouple Feeding Screw metering feed Heating Electrical Heating/8 Zones Output 1 -15 kg/ hr Heating power 6.4 kW Die heads
(Select one from three)Flat Die
( L×W:60×1.5 mm, 0.8 kW)Max. Temperature 350ºC Granulating Die
(Ф3×2, 0.4kW)Max. speed of screw 480 r/min Film casting Die
(150×1 mm,1.8 kW )Weight 160 kg Dimensions (H x W x D) 2000×500×1550 mm
