Parker SSD DC Motor Speed Controller - DC514c Series 514c-32-00 (514C/32/00) 514c32A

Description:

The regenerative 514C DC thyristor drive offers full four quadrant control of DC motors from single phase supplies. As such it is ideal for applications involving overhauling loads or where rapid and accurate deceleration is required. Together with the non-regenerative 512C they offer the perfect solution for lower power single motor and multi-drive applications.

Ambient:

Temperature : 0-40°C

150% for 60 seconds

Motor protection:

Stall condition 15 seconds internal

Electronic Overload Protection

Available frame sizes:

4, 8, 16 and 32 ampere

Parker SSD Drives 514C 32A Four Quadrant DC Thyristor Drive for 400V, 230V or 110V single/two phase Supply.
Typical Motor Output from 400V AC supply: 8.2kW (11HP) at 320V DC for motor speed and torque control.
Typical Motor Output from 230V AC supply: 4.6kW (6.2HP) at 180V DC.
Typical Motor Output from 110V AC supply: 2.3kW (3.1HP) at 90V DC.
Simple to set-up in analogue, fully-isolated form and ready to run from its default settings.
Dimensions: 160mm Wide x 130mm Deep x 240mm High - Panel mount with screw fixings on 253 x 120mm centres.

Input Current: 48A.
Input Voltage: 110V/120V, 220V/240V, 380V/415V or 460V/480V single phase/two phase +-10% at 50/60Hz.

Ambient Temperature: Rated at 40C.
Ventilation space above and below: 75mm, Ventilation space at sides: 0mm.
Heat Loss: 75W at maximum output.

Part Number: 514C-32-00-00-00, Exactly the same as SSD Drives, Rapier Drives, Eurotherm Drives equavalent and RS - 514C-32-01-00-00. Sometimes specified as 514C32000000.