Audited Supplier
CA
7*24
1 Year
Lubricated
Air Cooling
AC Power
Closed Type
Stationary Type
Single Screw Compressor
1.1m3/Min-12.5m3/Min
8/10 Bar
Pm Motor/Direct-Driven
Leadcom
7.5-75kw
China
841480
Product Description
Product Presentation
| CA Series Parameter Table | |||||||
| Model | CA7.5 | CA11 | CA15 | CA22 | CA37 | CA55 | CA75 |
| Rate Power | 7.5kW | 11kW | 15kW | 22kW | 37kW | 55kW | 75kW |
| F.A.D | 1.1m3/min | 1.6m3/min | 2.6m3/min | 3.6m3/min | 6.5m3/min | 10.0m3/min | 12.5m3/min |
| Pressure | ≤0.8MPa (Please contact if there is any other pressure requirement,Under different pressure, the exhaust volume can be adjusted) | ||||||
| Drive Type | PM Motor/Direct-driven | ||||||
| Voltage/Frequency | AC380V-50Hz | ||||||
| Starting Mode | Variable Frequency | ||||||
| Connection | G1/2'' | G1'' | G1'' | Rp1-1/2'' | G2'' | G2'' | |
| Size(LxWxH) | 954X600X1035mm | 1100X720X1180mm | 1100X720X1180mm | 1280X920X1350mm | 1580X1160X1600mm | 1580X1160X1600mm | |
| Weight | 155kg | 245kg | 285kg | 445kg | 920kg | 990kg | |
Comparison between permanent magnet motor and ordinary asynchronous motor
Compared with electrically excited motors, permanent magnet motors have the following advantages:
High efficiency
Eliminate excitation system loss, improve efficiency 5-12%, high power factor, large torque inertia ratio, stator current and stator resistance loss reduction, and rotor parameters can be measured, good control performance, motor direct drive, no speed slip, no bearing and connection transmission, efficiency increased by more than 3%, light load than the same specification asynchronous motor efficiency increased by 15-35% or so. Always efficient regardless of light load or heavy load. At present, the energy efficiency of permanent magnet motors used by Hylein has reached the national level 1 energy efficiency standards.
Low noise
Reasonable magnetic field design, magnetic density distribution, wider operating frequency range, lower operating noise. Truly constant air pressure: open loop vector control, response time < 50ms, can adjust gas production in an instant over a wide range.
Compact structure, small size, light weight, high precision and fast response
The exciting winding and the exciting power supply (magnetic pole core) are eliminated, and the structure is simple, the operation is reliable and the maintenance is convenient.
High starting torque
The starting torque and overload capacity of permanent magnet synchronous motor are one power level higher than that of three-phase asynchronous motor, and the ratio of the maximum starting torque to the rated torque can reach more than 3 times, while the general asynchronous motor is only 1.6 times.
High efficiency
Eliminate excitation system loss, improve efficiency 5-12%, high power factor, large torque inertia ratio, stator current and stator resistance loss reduction, and rotor parameters can be measured, good control performance, motor direct drive, no speed slip, no bearing and connection transmission, efficiency increased by more than 3%, light load than the same specification asynchronous motor efficiency increased by 15-35% or so. Always efficient regardless of light load or heavy load. At present, the energy efficiency of permanent magnet motors used by Hylein has reached the national level 1 energy efficiency standards.
Low noise
Reasonable magnetic field design, magnetic density distribution, wider operating frequency range, lower operating noise. Truly constant air pressure: open loop vector control, response time < 50ms, can adjust gas production in an instant over a wide range.
Compact structure, small size, light weight, high precision and fast response
The exciting winding and the exciting power supply (magnetic pole core) are eliminated, and the structure is simple, the operation is reliable and the maintenance is convenient.
High starting torque
The starting torque and overload capacity of permanent magnet synchronous motor are one power level higher than that of three-phase asynchronous motor, and the ratio of the maximum starting torque to the rated torque can reach more than 3 times, while the general asynchronous motor is only 1.6 times.
About Leadcom
Leadcom is a distinguished and professional manufacturer, renowned for its pioneering advancements in the production of air compressors and vacuum pumps. Hailing from Linghein, this innovative company was eventually acquired by the industry titan, Atlas Copco. With a robust legacy, the original team utilized their extensive expertise to re-launch Leadcom, bringing a rich tapestry of experience to the forefront of the industry.
With an illustrious legacy stretching over 25 years, Leadcom commands formidable capabilities in research, development, and production, establishing unmatched industry benchmarks.
Trailblazers in innovation, our expert team at Leadcom ingeniously engineered and manufactured the inaugural permanent magnet air compressor. Our expansive annual production prowess reaches an impressive 12,000 units, encompassing 15 diverse series with an exceptional 150 meticulously designed specifications, ensuring we adeptly meet the diverse needs across various sectors.
Leadcom is fortified by an exceptionally professional and dedicated customer service team poised to deliver swift and efficient solutions. From offering insightful pre-sales consultations that guide customers in selecting the ideal product tailored to their unique needs, to providing comprehensive installation guidance for a seamless setup, and ensuring prompt and effective after-sales maintenance, Leadcom remains steadfast in its unwavering commitment to customer satisfaction.
Leadcom is a distinguished and professional manufacturer, renowned for its pioneering advancements in the production of air compressors and vacuum pumps. Hailing from Linghein, this innovative company was eventually acquired by the industry titan, Atlas Copco. With a robust legacy, the original team utilized their extensive expertise to re-launch Leadcom, bringing a rich tapestry of experience to the forefront of the industry.
With an illustrious legacy stretching over 25 years, Leadcom commands formidable capabilities in research, development, and production, establishing unmatched industry benchmarks.
Trailblazers in innovation, our expert team at Leadcom ingeniously engineered and manufactured the inaugural permanent magnet air compressor. Our expansive annual production prowess reaches an impressive 12,000 units, encompassing 15 diverse series with an exceptional 150 meticulously designed specifications, ensuring we adeptly meet the diverse needs across various sectors.
Leadcom is fortified by an exceptionally professional and dedicated customer service team poised to deliver swift and efficient solutions. From offering insightful pre-sales consultations that guide customers in selecting the ideal product tailored to their unique needs, to providing comprehensive installation guidance for a seamless setup, and ensuring prompt and effective after-sales maintenance, Leadcom remains steadfast in its unwavering commitment to customer satisfaction.
FAQ
Q1: Are you a manufacturer or trading company?
A1: We are a prestigious professional air compressor manufacturer proudly based in Guangzhou, China.
Q2: What is your delivery time?
A2: Our streamlined processes enable delivery within a swift 15 days. For urgent orders, please do not hesitate to reach out to our sales team in advance for customized arrangements.
Q3: What are the terms of payment?
A3: We offer flexible payment options including T/T, L/C, Paypal, etc. Additionally, we accept various currencies such as USD, RMB, Euro, and more.
Q4: How long could your air compressor be used?
A4: Our durable air compressors are engineered to serve you efficiently for an impressive span of over 10 years.
Q5: How long is your air compressor warranty?
A5: We offer a comprehensive one-year warranty for the entire machine from the moment it leaves our factory.
Q6: Do your company accept ODM & OEM?
A6: Yes, we enthusiastically undertake full ODM & OEM projects, crafting solutions tailored to your specific requirements.
Q7: How about your after-sales service?
A7: 1. We provide comprehensive online instructions for installation and commissioning to support our valued customers.
2. Our team of highly trained engineers is available for overseas service, ensuring expert assistance wherever you are located.
A1: We are a prestigious professional air compressor manufacturer proudly based in Guangzhou, China.
Q2: What is your delivery time?
A2: Our streamlined processes enable delivery within a swift 15 days. For urgent orders, please do not hesitate to reach out to our sales team in advance for customized arrangements.
Q3: What are the terms of payment?
A3: We offer flexible payment options including T/T, L/C, Paypal, etc. Additionally, we accept various currencies such as USD, RMB, Euro, and more.
Q4: How long could your air compressor be used?
A4: Our durable air compressors are engineered to serve you efficiently for an impressive span of over 10 years.
Q5: How long is your air compressor warranty?
A5: We offer a comprehensive one-year warranty for the entire machine from the moment it leaves our factory.
Q6: Do your company accept ODM & OEM?
A6: Yes, we enthusiastically undertake full ODM & OEM projects, crafting solutions tailored to your specific requirements.
Q7: How about your after-sales service?
A7: 1. We provide comprehensive online instructions for installation and commissioning to support our valued customers.
2. Our team of highly trained engineers is available for overseas service, ensuring expert assistance wherever you are located.
