Pet/PP/PE 48 Cavities Preform Mould

8 cavity -48 cavities preform mould for the prefrom under 38mm neck size.
-The mold has balanced hot runner system with shut off valve gate, ensure there is no any stringing form on the injection gate of the performs.
-The cam roller design help the operator save the maintenance time of the molds.
-The weight of the preform such as 20g, cycle time is 18 Sec with general PET screw injection molding machine, It reaches13 Sec with 3 stage post cooling system.
Cooling System
-Spiral Water Cooling Way on cavity enhances mould cooling.
-Cooling system in neck and move neck plates brings an enhance cooling.
-Precise Distributary Plate distributes cooling water into cavity evenly, quicken preform cooling.
-Hot Runner Balance design ensures evenly force, uniform heating and identical preforms.
-Less energy cost and pressure lost.
-Lndependent cavity control system ensures nozzle temperature fluctuates within< 1
-Adopt imported Heating devices, Germany Hotset or Italy Rotfil.
Perfectly Balanced Hot Runner
-Hot runner with good balance ensures PET melt material running to each cavity and keep balanced pressure.
-The design of PET runnersensures minimum cutting force and IV lost.
-Reasonable heat distribution ensures stable AA content in all the cavities