Audited Supplier
·Product Introduction
PET pre-coating film is a composite film formed by laminating polyester film and EVA hot melt adhesive, which has superior composability and can be laminated without affecting the superior performance of PET pre coating film. PET pre coating film is also suitable for local UV oil polishing, hot stamping, screen printing, sanding and other processes behind the peritoneum, benzene free, environmentally safe.
· Usages
1. Packaging: Can be used for food and drug packaging, such as medicine, milk powder, cosmetics, candies, etc;
2. Decoration: Use its metallized appearance as a decorative film;
3. Textile: After treatment, it can be used for stamping and printing;
4. Architecture: Waterproof and moisture-proof film, protective film
· Features
1. It has good strength and stiffness, cold resistance, heat resistance, puncture resistance, and a beautiful metallized appearance;
2. It has good barrier effect;
3. It has good adhesion to the aluminum layer and good brightness.
· Typical thickness
PET film12mic+EVA glue 10mic; PET film12mic+EVA glue 12mic
thickness can be customized.
| Items | Unit | Index | Test conditions | |
| Tensile Strength | MD | Mpa | 213 | Temperature 23 ºC Relative humidity 40% |
| TD | Mpa | 201 | ||
| Elongation | MD | % | 121 | |
| TD | % | 105 | ||
| COF | non-aluminum side/non-aluminum side | -- | 0.56 | |
| Uniformity of aluminum coating | % | ±5 | ||
| Adhesion of aluminum layer (expressed as the area of aluminum layer detachment) | % | 5 | ||
| Wet tension of aluminum plated surface | Mn/m | 54 | ||
| Square resistance value of aluminum coating | -- | 2.0 | ||
| Water Vapor Transmission Rate | g/(m2·24h) | 0.97 | Temperature 38 ºC Relative humidity: 91% | |
| OTR oxygen transmission rate | cm3/(m2·24h·0.1Mpa) | 1.73 | ||
The above values of the properties obtained in our laboratory test.These values are for informative purpose and not in guarantee or warranty in any specific condition.Users are advised to conduct their own testing to determine product suitability to use.
To better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.
1.Q:What payment methods are supported?
A: Normally T/T & at sight L/C, the other ways could be negotiated.
2.Q:How is your delivery ?
A:Within 30 days after 30% advance,
3.Q:May I have your samples?
A: Yes, samples are free. However,the freight cost would be borne by customers.
4.Q:Do you make custom order?
A:Yes, OEM and ODM service is available for us. We can produce as customers' designs.
5.Q:Do you have MOQ?
A: Yes.The minimum order quantity depends on the specification you want.
6.Q:What is your advantage?
A: Best Quality & Best Service with Competitive price.
