Audited Supplier
PG1250
Centrifuge
Fertilizer
Filter Type
Intermittent Type
Vertical
Four-Feet Centrifuge
New
FULIDA
Wooden Case or Plastic Film
China
8421192000
Product Description
PG FLAT PLATE MANUAL SCRAPER BOTTOM DISCHARGE CENTRIFUGE
PRINCIPLES OF PRODUCT STRUCTURE
The motor drives the bowl to turn at a medium speed. The feeding valve is opened to feed the materials from the feeding pipe to the bowl. The materials are evenly spread to the bowl walls. The feeding will stop after the intended volume is reached. The bowl will turn at a high speed. Under the action of centrifugal force, the liquids are discharged outside the machine after passing through the filter cloth and bowl filtration pores. The solids are retained in the bowl. After the rotation speed of the bowl is reduced to a low one, the scraper will turn to make reciprocating movements and scrape the solids off the bowl walls. Then the solids will be discharged from the bottom of the centrifuge.
1. Scraper mechanism
2. Feeding pipeline
3. Blade
4. Shell
5. Drum
6. Transmission mechanism
7. Motor
8. Tablet based
9. Shock absorber
MAIN FEATURES
Frequency converter starting, stable starting, adjustable separation factor
Artificial upper discharge.
The reasonable structure design effectively eliminates dead corner of sanitation. The structural parts adopt smooth transition and the surfaces are subjected to polishing treatment. The external structural parts, fasteners and bowl are all made of stainless steel. The housing adopts flap type cover, so that the space between the housing and bowl can be cleaned thoroughly.
It is equipped with the spray cleaning system to carry out CIP cleaning of the centrifuge, including cleaning of inner walls of the housing, interior and exterior surfaces of the bowl, surfaces of the liquid collector and other invisible parts inside the centrifuge.
It complies with the requirements in the GMP standard.
Simples structure, convenient operation
The grains are not easy to break.
It is equipped with the nitrogen protection system to ensure air isolation between the inside cavity and the outside of the centrifuge.
Good versatility and wide application range
Closed structure. The seal is made of silicone rubber or fluorine rubber to meet the requirements of sealing and anti-explosion. It is suitable for poisonous, inflammable and explosive applications.
1. Machine base
2. Bowl part
3. Bearing block
4. Housing
5. Washing pipe
6. Machine cover
7. Oblique sight glass
8. Explosion-proof lamp
9. Feeding pipe
10. Flap turning device
11. Motor
12. Vibration absorber
13. Liquid discharging pipe
PRINCIPLES OF PRODUCT STRUCTURE
The motor drives the bowl to turn at a medium speed. The feeding valve is opened to feed the materials from the feeding pipe to the bowl. The materials are evenly spread to the bowl walls. The feeding will stop after the intended volume is reached. The bowl will turn at a high speed. Under the action of centrifugal force, the liquids are discharged outside the machine after passing through the filter cloth and bowl filtration pores. The solids are retained in the bowl. After the rotation speed of the bowl is reduced to a low one, the scraper will turn to make reciprocating movements and scrape the solids off the bowl walls. Then the solids will be discharged from the bottom of the centrifuge.
1. Scraper mechanism
2. Feeding pipeline
3. Blade
4. Shell
5. Drum
6. Transmission mechanism
7. Motor
8. Tablet based
9. Shock absorber
MAIN FEATURES
Frequency converter starting, stable starting, adjustable separation factor
Artificial upper discharge.
The reasonable structure design effectively eliminates dead corner of sanitation. The structural parts adopt smooth transition and the surfaces are subjected to polishing treatment. The external structural parts, fasteners and bowl are all made of stainless steel. The housing adopts flap type cover, so that the space between the housing and bowl can be cleaned thoroughly.
It is equipped with the spray cleaning system to carry out CIP cleaning of the centrifuge, including cleaning of inner walls of the housing, interior and exterior surfaces of the bowl, surfaces of the liquid collector and other invisible parts inside the centrifuge.
It complies with the requirements in the GMP standard.
Simples structure, convenient operation
The grains are not easy to break.
It is equipped with the nitrogen protection system to ensure air isolation between the inside cavity and the outside of the centrifuge.
Good versatility and wide application range
Closed structure. The seal is made of silicone rubber or fluorine rubber to meet the requirements of sealing and anti-explosion. It is suitable for poisonous, inflammable and explosive applications.
1. Machine base
2. Bowl part
3. Bearing block
4. Housing
5. Washing pipe
6. Machine cover
7. Oblique sight glass
8. Explosion-proof lamp
9. Feeding pipe
10. Flap turning device
11. Motor
12. Vibration absorber
13. Liquid discharging pipe
