Audited Supplier
punching machine
3
1
High-Speed Punching Machine
Open Punch
Double Action
Knuckle Press
CNC
Automatic
Mechanical Drive
High Precision
GS, CE
New
taialu
Wooden Package
20mm flip off cap punch
China
84621090
Product Description
pharmaceutical cap making punching machine with mould for 20mm aluminum cap
Description:
Punching machine (16 tons) with mould (5 cavities) & accessories, for 20mm aluminum cap
HS code (machine with mould): 84621090.
1.1 Components of the Machine
a. 16 tons power press, 380V (compatible with 440V);
b. Mould with 5 cavities for 20mm cap, made as per customer's cap drawing and samples;
c. Machine control system, including the ECU (Electronic Control Unit), touch screen and wires.
d. Uncoiler and servo motor powered material feeder;
e. Aluminum coil lubrication system;
f. Air generators and cap & ring blowing systems, including one electric air blower for the cap blowing, one mechanical air generator for ring blowing, air outlets and connection tubes;
g. Ring separator and conveyor belt;
h. Recoiler of waste material;
i. Mould protection system, including the separate ECU (Electronic Control Unit), sensor and connection wires;
j. Hand protection system, including two infrared sensors, mounting brackets and connection wires;
k. Self-lubrication system of punching machine, including pump, tubes and oil container.
1.2 Capacity: 40000-45000 caps/hour for 20mm; The design working speed is 150 times/min, while the speed 135-145 times/min is the most stable condition;
1.3 Aluminium coil width: 152mm (or 151mm by final trial)
1.4 Spare parts (no addition cost): 50% parts of the 5 cavities.
1.5 Tools: Standard tools for repair and maintenance of the machine & mould.
1.6 Installation dimension: 1700*1300*1900mm;
1.7 Installation Notes: Only one wire with 380V & 3 Phase is needed for the machine; No need to fix the machine to the ground.
1.8 Punching Oil required: 10# industrial white oil.
Packing :exported wooden package
Description:
Punching machine (16 tons) with mould (5 cavities) & accessories, for 20mm aluminum cap
HS code (machine with mould): 84621090.
1.1 Components of the Machine
a. 16 tons power press, 380V (compatible with 440V);
b. Mould with 5 cavities for 20mm cap, made as per customer's cap drawing and samples;
c. Machine control system, including the ECU (Electronic Control Unit), touch screen and wires.
d. Uncoiler and servo motor powered material feeder;
e. Aluminum coil lubrication system;
f. Air generators and cap & ring blowing systems, including one electric air blower for the cap blowing, one mechanical air generator for ring blowing, air outlets and connection tubes;
g. Ring separator and conveyor belt;
h. Recoiler of waste material;
i. Mould protection system, including the separate ECU (Electronic Control Unit), sensor and connection wires;
j. Hand protection system, including two infrared sensors, mounting brackets and connection wires;
k. Self-lubrication system of punching machine, including pump, tubes and oil container.
1.2 Capacity: 40000-45000 caps/hour for 20mm; The design working speed is 150 times/min, while the speed 135-145 times/min is the most stable condition;
1.3 Aluminium coil width: 152mm (or 151mm by final trial)
1.4 Spare parts (no addition cost): 50% parts of the 5 cavities.
1.5 Tools: Standard tools for repair and maintenance of the machine & mould.
1.6 Installation dimension: 1700*1300*1900mm;
1.7 Installation Notes: Only one wire with 380V & 3 Phase is needed for the machine; No need to fix the machine to the ground.
1.8 Punching Oil required: 10# industrial white oil.
Packing :exported wooden package
