Audited Supplier
Advantages:
Phocos CIS05/10/20A
1.factory direct
2..IP68 Water Proof
3.CE certificate
4.OEM
5.Durable and stable
6. industrial-grade
Factory direct
Germany brand
IP68 Water Proof
Phocos CIS05 CIS10 CIS20 Solar Street Light Charge Controller
Introduction
The CIS has no moving parts, switches or buttons. Settings such as battery type, deep discharge thresholds, timers, etc. are made quickly and easily via infrared remote control accessory.
All devices are connected to the controller by supplied lead wires rather than wire terminals. This feature eliminates the risk of damage from external influences (corrosion, dust, water, bugs, chemicals, physical shock) where components make electrical contact to the controller.
The extremely compact aluminum housing even allows for mounting CIS inside street light poles. CIS was developed in accordance with well-established Phocos standards incorporating the latest technology, highest-quality and best possible cost/performance.
Features
IP68 Water Proof Phocos CIS05 CIS10 CIS20 Solar Street Light Charge Controller
Can be ordered with one output as on-off switch and
another as output with dimmer function(CIS)or two
on-off switches (CIS-2L)
Corrosion-proof epoxy-encap sulated PCB (IP68)
Compact size
Infraredremote control programming accessory (CU)
Intelligent timer functions available for lighting control
Four-stagebattery charging (main, float, boost, equalizati- on), temperature compensated
Automatic system voltage recognition(12/24V)
Robust Aluminum Housing
specification
IP68 Water Proof Phocos CIS05 CIS10 CIS20 Solar Street Light Charge Controller
Type | CIS 05 CIS-2L 05 | CIS 10 CIS-2L 10 | CIS 20 CIS-2L 20 |
System voltage | 12/24 V auto recognition | ||
Max. charge/load current | 5 A | 10 A | 20 A |
Floatcharge | 13.8/27.6 V (25 °C) | ||
Main charge | 14.4/28.8 V (25 °C), 30 min. (daily) | ||
Boostcharge | 14.4/28.8 V (25 °C), 2 h Activation:battery voltage < 12.3/24.6 V | ||
Equalization | 14.8/29.6 V (25 °C), 2 h Activation:battery voltage < 12.1/24.2 V (at least every 30 days) | ||
Deep discharge protection: Cut-off voltage Reconnectlevel |
11 - 12 V / 22 - 24 V 12.8/25.6 V | ||
Overvoltage protection | 15.5/31.0 V | ||
Undervoltage protection | 10.5/21 V | ||
Max. panel voltage (Overvoltageprotection by varistor) | 55 V | ||
Temperaturecompensation (Charge voltage) | 25 mV/K at 12 V 50 mV/K at 24 V | ||
Max. own consumption | 5 - 8 mA at 12 V 6 - 10 mA at 24 V | ||
Grounding | Positive grounding possible | ||
Ambienttemperature | 40 to +60 °C | ||
Max. altitude | 4,000 m above sea level | ||
Batterytype | Leadacid (GEL, AGM, flooded) | ||
Adjustmentrange: Evening/morninghours Night/day detection |
0 - 15 h / 0 - 14 h 2.5 - 10 V | ||
Wire length | 10 cm | ||
Dimensions (W x H x D) | 82 x 58 x 20 mm | ||
Weight | 150 g | ||
Wire cross section | 1.5 mm2 | 1.5 mm2 | 2.5 mm2 |
Type of protection | IP68 (1.5 m, 72 h) | ||
Pictuers
IP68 Water Proof Phocos CIS05 CIS10 CIS20 Solar Street Light Charge Controller
PV-Systems exposed to extreme weather/environmental conditions (street lights, navigation buoys, etc.) have increased risk for damage in the power electronics. In order to assure reliable battery charge control under such conditions, Phocos developed an encapsulated charge controller (IP68) to prevent corrosion: CIS. CIS is an industrial-grade charge controller that is suitable for all practical PV applications. High-quality, 4-stage PWM-charging is combined with amazing features such as: low-voltage disconnect, flexible load timer functions, and a multi-LED system status display. CIS is available in two versions:
* Dual load to independently control two loads
* Output Dimming to save energy in lighting applications.
PRODUCT FUNCTION
1. Over protection: could chose LVD mode or SOC mode
2. Overvoltage protection: 12V system 15.5V, 24V system 31V cut off the load
3. Low-voltage protection: 12V system 10.5V, 24V system 21V cut off the load
4. Over-current protection: When the actual current is 110% greater than the rated current, Delay of 120 s to cut off the load
When the actual current is 150% greater than the rated current, Delay of 10 s to cut off the load
When the actual current is 200% greater than the rated current, Delay of 3 s to cut off the load
5. Short-circuit protection: When the actual current is three times greater than the rated current, immediately cut off the load
6. Reverse polarity protection
7. Overheating protection
Package
IP68 Water Proof Phocos CIS05 CIS10 CIS20 Solar Street Light Charge Controller
product overview
CIS controller is special designed for solar street light, provide perfect, multiple protection for solar street lamps' electrical systems, and through good control strategy, effective extend the system's power supply time
1. protection grade: IP68, effective dust-proof and water-proof
2. sturdy and durable aluminium alloy case, anti-corrosion
3. four stages charge control(main charge,powerful charge,equalizing charge,float charge)
4 Single and double street light output contro l flexible
5. infrared remote controller (CU) set, simplicity and convenience operator
6. LED status indicate
7. at night all the time,morning and twilight double time light-operated/time control timing function
8. external temperature sensor, automatic temperature compensation
9. output power regulatory function, saving energy and protecting environment.
10. compact structure, small volume, easy to install
Delivery
IP68 Water Proof Phocos CIS05 CIS10 CIS20 Solar Street Light Charge Controller
Warranty
3 years warranty time.
Shipment :
1. By EMS,DHL,FEDEX,TNT,UPS Or other expresses ( door to door)
2. By Air ,By sea
contact us
Amber
COMMERCIAL ENERGY GROUP LIMITED
Qingdao commercial energy electronics co.,ltd
Mobile:0086-15166682350
commercial-energy.en.made-in-china.com
