Audited Supplier
Iron(Fe) and its alloys (Steel alloy, Cast iron, Fe-Low alloy, Fe-Cr steel, Fe-Cast iron, Fe-Cr-cast, Fe-Mn steel, Fe-Tool steel etc.)
Aluminium(Al) and its alloys (Al-Si alloy, Al-Zn alloy, Al-Cu alloy, Al-Mg alloy, Pure-Al alloy etc)
Copper(Cu) and its alloys (Brass, Copper-Nickel-Zn, Aluminum Bronze, Tin-lead Bronze, Red Copper, Be-Bronze, Si-Bronze etc)
Nickel(Ni) and its alloys (Pure Ni, Monel metal, Hadtelloy Alloy, Incoloy, Inconel, Nimonic etc)
Cobalt(Co) and its alloys (Co-orientation, Low Co alloy, Stellite 6,25,31, Stellite 8,WI 52, Stellite 188, F)
Magnesium(Mg) and its alloys (Pure Mg, Mg/Al/Mn/Zn-alloys)
Titanium(Ti) and its alloys
Zinc(Zn) and its alloys
Lead(Pb) and its alloys
Tin(Sn) and its alloys
Argentum(Ag) and its alloys
Small sample, special size sample and wire detection
| Item | Index |
| Detection matrix | Iron base, copper base, aluminum base, nickel base, cobalt base, magnesium base, titanium base, zinc base, lead base, tin base, silver Base, manganese base, chromium base and other 13 matrix |
| Optical System | Pach-lungeland circular full spectrum vacuum optical system |
| Wavelength range | 165-589nm(Upper and lower limit detectors can be installed to expand the wavelength range) |
| probe | High resolution multi-CMOS image sensor |
| Light source type | DDD Digital Excitation Light Source, High Energy Precombustion Technology (HEPS) |
| Discharge frequenc | 100-1000Hz |
| Discharge current | Max. 400A |
| Detection time | Depending on the sample type, it is generally around 25s |
| Electrode type | Tungsten jet electrode |
| Analytical gap | Sample stand analysis gap :3.4mm |
| Vacuum system | Vacuum software automatic control, monitoring |
| Argon purity | 99.999% |
| Argon pressure | 0.5MPa |
| Working power supply | AC220V 50/60Hz |
| Instrument size | 750*560*350mm |
| Instrument weight | About 90kg -100KG |
About spectrometer order procedure
1. Please company or factory and related personnel Determine the material of the product to be tested and the relevant instruments required.
2. We'll quantity through e-mail or WeChatNegotiate all details about this order.
3. Negotiated payment as advanced payment reached, Tell consignee information, Calibrate the target material into the instrument again, and prepare the standard sample and accessories according to the material and requirements selected by the customer .
4. Ship out goods as the balance payment received,Send out documents that customers required.
5. Customers signed the good, and engineer fly there to installation Train 1-2 operators.
6. Warranty 1 year after installation,Daily use details or questions can also be answered by network remote transmission.
7. After-sale department call back to survey the customers' satisfication ,Communicate on a regular basis.
After the instrument arrives at the port, please load and unload it in time and transport it to the laboratory prepared by the factory (or unit) in advance. Then check whether the outer package is damaged or not, as well as the condition of the internal instrument products. After checking the list, our company will assign the installation engineer to go on a business trip to the local area to carry out on-site installation and commissioning, and train 1-2 personnel suitable for operation. The training time is usually completed within 3-4 days of arrival. Through training, the relevant personnel master the use of spectral analysis, skilled instrument operation and maintenance. Later in the process of use, if you have technical questions, you can also communicate in time through remote network chat tools, and communication is convenient. The overall analysis process of the instrument is automatic, learning to use is relatively simple, as long as the operator is careful, will normally use the computer, there is a certain degree of education can be mastered.
