Audited Supplier
SPD-10T-10
Power Source Arrester
Protective Gap
Parallel Arrester
AC/DC System
Small
Low Voltage
Cuboid
PE
ROHS, ISO9001, CCC, CE
Huakun
420V~
10ka
20ka
1.8kv
Type2
1200V
25ns
300A
Lt-SSD15X
by Screw Terminals: 6-35mm^2
2.5nm
15mm
DIN Rail 35mm(En60715)
IP20
PBT
Huakun
Carton Box
72*90*68mm
Shanghai, China
85363000
Product Description
Product Feature1.Use High-efficiency varistor nano-alloy graphite material, fast response time;
2.Suitable for TT, IT, TN and other power supply systems, used for T2 protection;
3.With remote communication alarm contact, convenient remote monitoring protector installed state;
4.Large inrush current and low residual error;
5.Standard 35 mm rail installation;
6.Easy installation, simple maintenance.
Installation matters
1.Instructions for breaking away from failure
When the surge protector is overheated or broken down due to deterioration, the failure release device can automatically disconnect it from the grid, and red (window) signals (a normal window display for the green), which suggests that the protector has failure need to be replaced immediately.
2.the remote communication alarm device
Remote communication contact for a normally open - a normally closed contact, when the failure of one or more modules, dry contact state.
| Max. continuous operating voltage Uc(V~) | 420V~ |
| Nominal discharge current In(kA) | 10kA |
| Max. discharge current Imax(kA) | 20kA |
| Protection level Up(kV) | 1.8kV |
| SPD special backup protector (disconnector) (kA) | 80kA |
| Response time (ns) | <25 |
| Dimensions (width*height*depth) (mm) | 72*90*65 |
| Working environment | -40~+70ºC,Relative humidity<95%(below 25ºC) |
| Protection type | Type 1 |
