Audited Supplier
JJEC-A
3200mm
20000kg
Strength Testing Machine
>1000KN
0.5
Mechanical Load
Static Load
Digital
Computer Control
0-100Kg
All
Jj-Test
JJ-TEST
Wooden
ISO1167 ASTM D1598 ASTM D1599
China
90248000
Product Description
End caps
JJEC-A End caps is designed for internal hydrostatic pressure testing of pipes and fittings. It is used to seal the sample in order to generate internal pressure in the sample.
Characters
JJEC-A End caps is designed for internal hydrostatic pressure testing of pipes and fittings. It is used to seal the sample in order to generate internal pressure in the sample.
| Model | JJEC-A(DN) | |
| Diameter rasnge | 10-2000mm | |
| Material | SS304 stainless steel | Carbon steel |
| Configuration | One pair of endcaps (including a pair of sealing rings) One set of Allen wrench (configured according to fixture specifications) | |
- Patented structure ensures easy mounting and perfect sealing.
- Material: stainless steel, which will not be rust even in water at 95ºC.
- Hollow-out design makes it lighter in weight, easier for observation and operation. For example, Single-end weight (after assembly) of DN400 end caps less than 50kg and the weight of clamps is 7.3kg.
- End caps are produced with a specific depth from O-ring to the internal bottom which ensures that even on chamfered and oval PE pipes.
- Stainless steel chain is used to connect upper and lower end caps, to avoid the lower one go down to the bottom of water thank if specimen brittle rupture.
- There is air release valve to discharge the air left in the pipe.
- Air resource inlet and drain port are introduced to drain water after testing for big diameter end caps.
