Audited Supplier
Have higher transparency, lower gloss, lower rigidity
Have a stronger impact strength
Have good surface stiffness and scratch resistance
| PP TP5000G25 NA |
| Product Description | Applications | ||||||||
| · Good dimensional stability | · Excellent flowability | ||||||||
| · Excellent Flame retardant | · Good mechanical properties balance | ||||||||
| Properties | Test Method | Test Condition | Unit | Typical Values | |||||
| Physical properties | |||||||||
| Specific Gravity | ISO 1183 | 23ºC | g/cm3 | 1.34 | |||||
| MI | ISO 1183 | g/10min | 6 | ||||||
| Mechanical properties | |||||||||
| Tensile Strength | ISO 527 | 50mm/min | MPa | 70 | |||||
| Flexural Strength | ISO178 | 2mm/min | MPa | 100 | |||||
| Flexural Modulus | ISO 178 | 2mm/min | MPa | 6200 | |||||
| Notched Charpy Impact Strength | ISO 179/1eA | 23ºC | J/m | 75 | |||||
| Thermal properties | |||||||||
| Heat deflection temperature | ISO 75 | 0.45MPa | °C | 160 | |||||
| Mold Shrinkage | internal test method | 48 hours after the tool | 0.4-0.7 | ||||||
| Melting Point | DSC | - | C | ||||||
| Other properties | |||||||||
| Flammability | IEC 60695 | GWIT 800ºC | PASS | ||||||
| GWFI 960ºC | PASS | ||||||||
| UL94 | 1.5mm | V0 | |||||||
1. The data in the table is the test data of the product performance, but the value cannot be used as the guarantee value of the performance in the specific use, only for the user's preference.
2. The data on the flammability level in the table is not intended to reflect the degree of danger of the material under actual fire conditions.
Polypropylene (PP) products use grade :
1). Film Grade
- Biaxial Orientation Stretching Polypropylene (BOPP): mainly used in the production of high-stiffness, high-transparency packaging film. It is also widely used in the production of printing and laminated film, Matt film, pearlized film, synthetic paper, cigarette film, etc
- Casting Polypropylene(CPP): It is also widely used as the packing for clothing, stationery, food, medicine, cosmetics, textiles, etc.
2). Injection Molding Grade
- PP Impact Copolymer: widely used in the production of industrial products, such as dashboards, auto interior decorations, auto bumpers, interior and exterior parts of washing machines, accumulator containers, and tanks. can also be used to make household articles, such as bottle caps, cookware, furniture, toys, toolkits, travel cases, bags, and various packaging containers.
- PP Random Copolymer: widely used in the production of medical appliances with high transparency, such as medical syringes, medical infusion bottles, medical centrifuge tubes, and sample tubes. It is used in the production of food containers, stationery, packaging materials, and houseware.
- PP Homopolymer: widely used in the production of small electrical household appliances, such as electric kettles, electric utensils, electric irons, air heaters, electric hair dryers, electric toasters, and electric hand dryers.
3). Pipe Grade
PP Pipe Grade is mainly used in the production of pipes used in building water supply systems, heating systems, and chemical piping systems. Finished Products by lightweight, corrosion resistance, long service life, thermal retardation, and recyclable processing scrap.
4). Fiber Grade
PP Fiber Grade is widely used in the production of bulked continuous filament (BCF), fine and superfine staple fiber, cigarette filter tow, and superfine non-woven fabric in high-speed and ultrahigh-speed spinning and spun-bonded nonwoven fabric production.
5). Yarn Grade
PP Yarn Grade is widely used in the production of woven bags colored stripe cloth for sunlight shading or covering use, the carpet backing (base fabric), container bags, tarpaulin, and ropes.
6). Coating Grade
PP Coating Grade is mainly used for coating woven bags, tarpaulin, colored stripe cloth, and pipes.
7). Powder Grade
PP powder grade is mainly used to produce general-purpose products such as ropes, woven bags, packaging tapes, toys, daily necessities, and non-woven fabric.
Are you a trading company or manufacturer?
We are a manufacturer.
About Sample?
A 5 KG Free Sample can be offered per your request.
About Material Color?
We can make the material to your appointed color according to Pantone/RAL#.
How does your factory control the quality?
Quality is the Priority, we always pay great importance to quality from beginning to end, and we have professional QC for item quality from spare parts to finished goods.
How many days for mass production?
20 days after all artwork and 30% deposit are confirmed.
How can I get the samples? Is the sample free?
7-10 days to send free samples by DHL, TNT, and UPS.
