Audited Supplier
Product Introduction
Shuttle style rotational molding machine is placed along a straight line with oven and two mainframes in its center. Cooling chamber and loading station in both sides. When one arm on one side rotating the mold into the oven to get heated, the molds on other arm can be demoulded or adding material.
In this way, the operation is flexiable for manufacturing comparatively large product. Even for comparatively small product, productivity is high. Besides, equipment is relatively simple and easy to be maintained. At present, this kind of rotational molding machine is broadly used in our country.
Technical parameters
| Model No. | Oven Size(mm) | Machine Dimensions(mm) | Total Power (kw) | Total weight(Ton) | ||
| L | W | H | ||||
| BF-1600CS | Ø1600 | 7500 | 3500 | 2600 | 10 | 5 |
| BF-2000CS | Ø2000 | 9500 | 4500 | 3100 | 15 | 8 |
| BF-2500CS | Ø2500 | 12000 | 6000 | 3800 | 25 | 10 |
| BF-3000CS | Ø3000 | 13500 | 7000 | 4300 | 32 | 12 |
| BF-3500CS | Ø3500 | 15000 | 8000 | 4800 | 40 | 15 |
| BF-4000CS | Ø4000 | 17000 | 9000 | 5400 | 40 | 18 |
| BF-4500CS | Ø4500 | 18500 | 10000 | 6000 | 50 | 22 |
| BF-5000CS | Ø5000 | 20500 | 11000 | 6200 | 50 | 25 |
| Machinery type: | Shuttle rotomolding machine |
| Heating supply: | Natural gas,liquefied gas,diesel oil |
| Temperature control: | DTE Control±2ºC |
| Burner system: | Riello |
| Cooling mode: | Fan cooling |
| Control mode: | Touch screen+PLC(Siemens brand) |
| Electric brand: | Schneider,Omron |
| Delivery time: | About 60 days after receive the deposit |
| Overseas Installation period | It depends on machine size,usually takes 10-20days |
| Heating rate: | 3 miniutes from room temperature to 280 degree in oven |
Benfan rotomolding machine advantage:
1. It only takes 3mins. from room temperature increase to 250 to 280 degree in oven
2. Arm is made of special alloy material which is good load
3. Full gear transmission, high efficiency
4. Full automatic operation,prognsis equipment trouble in advance and solve it in time.
5. Heavy duty oven and energy saving
6. Loading and unloading easy for mould
7. Special deep cavity heating technical, suitable for complicated product
8. Internet remote control (if the machine has problem in your factory, we can solve the problem through internet)
9. PLC and Motors are Siemens brand from German,Burner is RIELLO from Italy,Bearing is NSK from Japan, all electrial compenents are using Schneider brand.
10. Big computer screen, bob-weight system, special made motor, thermostability sealing arm head etc
11. Use circle oven, it is more uniform heat distribution on the mold, that means it is good for product making and also more energy saving.
Quick Details
