Audited Supplier
PTFE sheet by suspension polymerization of PTFE resin molding. It has the best chemical resistance in known plastics and does not age. It has the best coefficient of friction in known solid materials and can be used at -180 ° C to +260 ° C without load.Sepcifications
| PTFE Molded Sheet,Skived Sheet/Tape | |||
| Type | Thickness(mm) | Width(mm) | Length(mm) |
| PTFE Molded Sheet | 4~ 600 | 150 ~ 2000 | Max 2000 |
| PTFE Skived Sheet | 0.3 ~ 6.5 | 300 ~ 2700 | ≥ 200 |
| PTFE Molded Tape | 0.5 ~ 4.0 | 100 ~ 500 | ≥ 1000 |
| PTFE Skived Film | |||
| High-Density | 0.015,0.030,0.020,0.035,0.025,0.04 | 30 - 90 | ≥ 500 |
| Semi-Density | 0.03,0.035,0.05-0.1 | 60 - 90 | ≥ 1000 |
| Common | 0.02,0.025,0.03,0.035,0.04-0.1,0.05,0.15,0.08,0.2,0.1,0.3 | 60-90 100 - 1000 | ≥ 500 |
Main Properties (sheet 1)
| Properties | Unit | Result |
| Apparent Density | g/cm3 | 2.10 ~ 2.30 |
| Tensile Strength(min) | Mpa | 15.0 |
| Elongation At Break(min) | % | 150 |
| Dielectric Strength(min) | KV/mm | 10 |
(sheet 2)
| Property | Unit | High- Density | Semi - Density | Common |
| Tensile Strength ≥ 0.01 | Mpa | ≥ 30 | ≥ 30 | ≥ 10 |
| Elongation At Break ≥ 0.01 | % | ≥ 30 | ≥ 60 | ≥ 100 |
| 1MHZ Dielectric Loss Tangent ≥ 0.01 | 2.5 × 10 -4 | - | - | |
| 1MHZ Dielectric Constant | 1.8 - 2.2 | - | - | |
| Dc Breakdown Voltage (normal tep) | KV/M | 200 40 | 60 40 | 30 |
Quality control is a necessary step FOR EACH ORDER
Production Process for PTFE sheets As Following Steps :
PTFE sheets are often used in applications where a combination of these properties is required, such as in gaskets, seals, electrical insulation, and lining materials. PTFE sheet has a high melting temperature, outstanding chemical resistance, and self-lubrication properties. We offers a variety of PTFE products to fit your needs.
Q1.What is your terms of packing
Answer: Generally, we use carbon boxes with wooden boxes outside ,to ensure our products has been safely delivered
Q2.What is your term of delivery
Answer: FCQ DDP, if the usually take 7-10 days
If the total weight of the goods is up to ten tons, the required transport time is approximately 7-10 days
Q3:How about customized service
The demand for product customization is Available
Our customized service can provide unique and personalized plastic parts
