Audited Supplier
ABLB75II
Extrusion Blow Molding Machine
PP, PE, Hdpeand So on
Extrusion-Blow Molding
Automatic
Computerized
CE, ISO9001:2008
Bottle
8L
APOLLO
Film Packing
CE, ISO9001
Zhangjiagang City, Jiangsu Province, China
8477301000
Product Description
Plastic Test Tube Bottle Making Blow Molding Machine
Product Description
LDPE Plastic Sea Ball Blow Molding Machine (18cm diameter)
Die head: Center-feed die head
Extrusion system: Adopt world-famous brand automatic temperature controlling device. Drive the screw with electromagnetism motor reducer to realize stepless regulating.
Clamping device: Adopt bi-directional synchronous clamping device with double axis single cylinder to stabilize equipment well
Blowing device: with upper blowing type
Hydraulic system: The whole hydraulic system adopts world-famous brand controlling components and proportional controlling circle.
Electric controlling system: Adopt programmable controller made in Mitisubishi, Japan. Every electric component is of world-famous brand.
| Max. Product volume | 4 liters |
| Screw diameter | 65mm |
| Screw L/D ratio | 24 L/D |
| Screw drive power | 18.5 KW |
| Screw heating capacity | 6 KW |
| No.of heating zone | 3 zones |
| Output of HDPE | 80KG/H |
| Oil pump drive power | 7.5 KW |
| Clamping force | 45KN |
| Max.size of mold | 80-350mm |
| Mold stroke | 320 X 360mm |
| Max.die diameter | 140mm |
| Blowing pressure | 0.6 mpa |
| Air Volume | 0.6 M³/MIN |
| Cooling water pressure | 0.3mpa |
| Water consumption | 65 L/MIN |
| Size of Machine | 2.95x2x2.7m |
| Weight of machine | 4.7ton |
