Audited Supplier
WD
CB, CCC, ISO9001, CE
R134A
Air Source Heat Pump
220~240V/50Hz
5c~45c
1kw
3.5-7kw
3.5L/H
55c
10-65c
Flower,Herb,Mushroom,Fruit & Vegetable
Wotech
Factory Standard
1200*705*1865mm
China
84186120
Product Description
Plug & play Dehydration and Dehumidification air to water Heat Pump for fruit & Vegetable drying
This series can be used for drying fruit,tabacco,sausage,aquatic products,vegetables,tea,chinese herbal madicines,chimney etc.
Features:
1. Smart programming,design for drying various products
2. All-in-one structure,plug and play with 220V power supply,suitable for small farms.
3. All stainless steel casing, without any chemical
anti-rust or paint residues,100% pollution-free during drying process.
4. Efficient condensation & dehumidification technology, greatly improve the dehumidification performance.
1. Smart programming,design for drying various products
2. All-in-one structure,plug and play with 220V power supply,suitable for small farms.
3. All stainless steel casing, without any chemical
anti-rust or paint residues,100% pollution-free during drying process.
4. Efficient condensation & dehumidification technology, greatly improve the dehumidification performance.
| Code | WD04 | WD07 | |
| Heating Capacity | Kw | 3.5 | 7.0 |
| Moisture Removal Rated | L/H | 3.5 | 5.0 |
| Input Power | Kw | 1 | 2.1 |
| Input Current | A | 4.78 | 9.9 |
| Refrigerant | R134a | R134a | |
| Electrical Service Requirements | V/PH/HZ | 220V/1PH/50HZ | 220V/1PH/50HZ |
| Ambient Temperature | ºC | 5-45 | 5-45 |
| Rated Temperature | ºC | 55 | 55 |
| Minimun Drying Temperature | ºC | 10 | 10 |
| Maximum Drying Temperature | ºC | 65 | 75 |
| Air Flow Rate | CFM | 588 | 1765 |
| Unit Dimensions(L/W/H) | mm | 1200*705*1865 | 1900*1000*1785 |
| Net Weight | kg | 150 | 260 |
Principle of Heat Pump Dryer
A heat pump dryer works as a closed loop system by heating the air using it to remove moisture and then reusing it once the moisture is removed.Rather than releasing warm,humid air through a dryer vent to the exterior of the space as a conventional dryer does, a heat pump dryer sends it through an evaporator to remove the moisture without losing too much heat. Applying a refrigerant cycle as parts of this process means less electricity is used to generate heat.
