Audited Supplier
ABS-H04
IR Band and UV Band
Spectral Emission System
Flame Detection Test System
Flame Detector Tester
Fire, Flame Detector Tester
CCC
Anodized Aviation Aluminum and Stainless Steel
GQ
Standard Export Packing
GB
China
9031499090
Product Description
ABS-H04 (no open flame) Point type IR and UV Flame Detector Test instrument
Flame detector test adopts IR transmitting tube and UV phottube with output IR waveband scope of ( 0.5μm ~ 5.5μm ) , UV waveband scope of (185 nm ~255 nm) . Under high-speed SCM as the control chip, the IR with characteristic frequency and duty factor can be emitted and UV waveband in line with flame characteristic frquency can be output. The IR optical filter with detachable structure can be applied to the spectral single-band IR detector.
Technical Parameters
| Test type | Point type IR detector, Point type UV detector | ||
| Test Head Materials | Anodized aviation aluminum and stainless steel | Connecting rod material | Stainless steel |
| Standard Configuration Length | 2.5m (can increase the number of connecting rods) | weight | 3.95 Kg |
| Test type | Flame detector | Number of detectors tested | >400 pcs |
| Output IR waveband scope | 0.5 μm~5.5 μm | ||
| IR wavelengths are filtered through a optical filter | 4.2 μm~4.6 μm Single band,two waveband,three band flame detector | ||
| After the optical filter is removed, a single band IR flame detector with broad spectrum is detected | |||
| UV band | UV flame detector with wavelength of 185nm ~ 255nm | ||
Remove the shield, align the test head with the flame detector, and press the key. The distance between detector and flame detector shall not be more than 100 mm.
