Audited Supplier
C9
Online Service
7 -10 Years Guarantee
Rear Window
Frost Prevention, Anti Fog, Anti Icing, Anti-UV & Glare
Polycarbonate
ECE, DOT, ISO
Safety Glass
ISO/TS16949
North America
PE Protective Film, Carton, Wood Pallet/Customized
customized
China
Product Description
Advantage
1. Good light transmission: reaches 12%- 92% depending on color and thickness.
2. Light weight and easy installation: 1/2 of glass based on the same thickness.
3. Weather and UV resistant-properties retained for years.: Temperature resistance range is - 40° C ~ +130° C, with an ultraviolet coextruded film on the sheet surface. It can prevent the resin fatigue or yellowing caused by the ultraviolet.
4. Excellent impact resistance: 80 times that of glass.
5. Sound insulation and noise reduction: 5mm sheet attenuate 23db, 10mm sheet attenuate 35db.The sound insulation effect is good. Under the condition of same thickness ,the sound of PC board can be reduced by 5-9 DB(decibel) more than that of glass,
6. Fine plasticity: Suitable for processing such as carving, drilling, cutting, bending, hot forming, printing...
7. Flame resistance: UL94 V-2, UL94 V-0, ASTM E84 CLASS A.The ignition point of PC solid sheet is 630 Celsius degree,
Application
Automotive Glass
Racing Glass
eVTOL
Heavy Equipment
Rail Train Glass
Marine Glass
Architecture
Company profile
Factory Tour
Honors and certificates
Laboratory & Testing
Racing Glass
eVTOL
Heavy Equipment
Rail Train Glass
Marine Glass
Architecture
Company profile
Jiangsu ANKO Optical Materials Co., Ltd. is located in Jingjiang Economic and Technological Development Zone, Taizhou, Jiangsu Province, with a registered capital of 15,387,400 yuan and a factory area of 7,000 square meters. The main products are Polycarbonate sheet, Polycarbonate glass for vehicles and Polycarbonate innovative technology customized products, the company's products are widely used in construction, rail trains, passenger cars, construction machinery, bus and other industries.
The company focuses on the development and application of new products of PC transparent composite materials. It is the first enterprise in China to pass the ECE R43 test and certification for automotive plastic glass, and is committed to becoming the leader of innovative products of PC transparent.
The company focuses on the development and application of new products of PC transparent composite materials. It is the first enterprise in China to pass the ECE R43 test and certification for automotive plastic glass, and is committed to becoming the leader of innovative products of PC transparent.
Ø In 2015, our team started the PC products research and development, original from the Automotive Division of Kunshan Eson (a subsidiary of FOXCONN)
Ø In 2018, Suzhou ANKO was established and became the first enterprise in China to pass the EU ECE R43 test of automotive plastic glass and obtain E-mark certification and patents
Ø In 2019, ANKO obtained the Tier-1 supplier qualification of carmakers and CRRC, started mass production
Ø In 2020, Jiangsu ANKO was established to set up a unique factory to PC glass parts for automotive industry world
Ø In 2018, Suzhou ANKO was established and became the first enterprise in China to pass the EU ECE R43 test of automotive plastic glass and obtain E-mark certification and patents
Ø In 2019, ANKO obtained the Tier-1 supplier qualification of carmakers and CRRC, started mass production
Ø In 2020, Jiangsu ANKO was established to set up a unique factory to PC glass parts for automotive industry world
Factory Tour
Honors and certificates
1. The first company in China to pass the European
automotive plastic glass ECE R43 test and certification
2. One of China's national automotive plastic glass safety
standard setters, GB-9656 regulation
3. 21+ Patents covered all aspects of our Know-how
4. ISO9001
5. IATF16949
Laboratory & Testing
