Audited Supplier
SDC22D
Polyurethanes/PU
Engineering Plastics
Thermoplastic Plastics
Spray
Yellow
15-20s
100-120s
160-200
35~46kg/M3
200~300kpa
Building
Drum
Liquid
Best Insulation Raw Materials Polyol and Mdi for S
shunda
220kg/Drum
Two components
China
39072090
Product Description
Blend Polyol SDC22D
Continuous Sandwich Panel High Flame Retardant Foam
DESCRIPTION
SDC22D is a kind of blend polyol used for the continuous line, color steel sandwich panel high flame retardant rigid PU foam. It is widely used for the production of cold storage sandwich panel, building roof panel, factory out wall panel, door panel and so on. It used together with isocyanate to make rigid PU foam of the color steel sandwich panel through PU foaming machine and laminating plant. The foam produced has the characteristics as following:
Importance: The above mentioned are typical test values, and the specific data may vary slightly due to environmental conditions.For our products, the data are not legally binding.
Other unmentioned matters and TDS&MSDS.Please visit our official website shundapu.en.made-in-china.com
Or please contact us for information:
Continuous Sandwich Panel High Flame Retardant Foam
DESCRIPTION
SDC22D is a kind of blend polyol used for the continuous line, color steel sandwich panel high flame retardant rigid PU foam. It is widely used for the production of cold storage sandwich panel, building roof panel, factory out wall panel, door panel and so on. It used together with isocyanate to make rigid PU foam of the color steel sandwich panel through PU foaming machine and laminating plant. The foam produced has the characteristics as following:
- Low ODP.
- Good flatness, the product is not easy to deformation
- High flame retardant, the low thermal conductivity, low water absorption and good dimensional stability.
| Physical Properities | Test Method | Metric | Value |
| Density | GBT 6343-2009 | Kg/m³ | 30-50 |
| Compressive Strength | GBT 8813-2008 | MPa | 0.12-0.20 |
| Initial Thermal Conductivity | GBT 10294-2008 | W/(mK) | 0.018-0.024 |
| Oxygen index | GBT 2406.2-2009 | % | ≥26.0 |
| Dimensional Stability | GBT 8811-2008 | % | 0-2.0 |
| Close Cell Content | GBT 10799-2008 | % | 90±5 |
| Water Absorption | GBT 8810-2005 | % | ≤3 |
Other unmentioned matters and TDS&MSDS.Please visit our official website shundapu.en.made-in-china.com
Or please contact us for information:
