Audited Supplier
TH601 series
ISO, MSDS, ISO14001, ISO9001
Acrylic
Liquid
Polyurethane
Spray
Finish Coat
Film Forming Matter
Conversion Type
Roofing and Waterproofing
Liquid
2.0mm
Metal Ceilings
Spray Painted
Anti-static, Fireproof, Heat Insulation, Sound-Absorbing, Waterproof
Outdoor, Indoor
on-Line Service
0
Pallet
Component A: 18KG/bucket Component B: 12KG/bucke
China
3911900003
Product Description
Polyaspartate anticorrosive paint coating for Steel material surface
Spray Polyurea Elastomer Coating SPUA for
Anticorrosion and waterproof protection of construction, chemicals, transportation,
metallurgy,electric power, aerospace, marine, shipbuilding and other fields.
Company Information
Polyaspartate anticorrosive paint coating for Steel material surface
Polyaspartate anticorrosive coating TH-601 stiffness
| Basic performance technical indicators | |||
| Item | Technical Index | ||
| HG/T 5368-2018 | 601 | ||
| Volatile organic compound (VOC) content (g/L) | ≤250 | 150 | |
| Non-volatile content (%) | ≥80 | 88 | |
| Drying time (h) | Surface drying time | ≤2 | 1 |
| Hard working time | ≤5 | 4 | |
| Appearance of coating film | normal | normal | |
| Bending test (mm) | 2 | qualified | |
| Impact resistance (cm) | 50 | qualified | |
| Wear resistance (1000g/1000r)/g | ≤0.06 | 0.02 | |
| Pencil hardness (scratch) | ≥H | H | |
| Adhesion (pull method) (MPa) | ≥7 | 12 | |
| Acid resistance [5% (mass fraction) sulfuric acid solution, 168h] | No blistering, no rust, no cracking, no peeling No bubbling, no rust, no cracking, no peeling | No blistering, no rust, no cracking, no peeling No bubbling, no rust, no cracking, no peeling | |
| Alkali resistance [5% (mass fraction) sodium hydroxide solution, 168h] | No blistering, no rust, no cracking, no peeling No bubbling, no rust, no cracking, no peeling | No blistering, no rust, no cracking, no peeling No bubbling, no rust, no cracking, no peeling | |
| Resistance to artificial weathering (1500h) | no blistering, no rust, no cracking, no peeling, No chalking, discoloration ≤2 level, loss of light ≤2 level | no blistering, no rust, no cracking, no peeling, No chalking, discoloration ≤2 level, loss of light ≤2 level | |
| Humidity resistance | Atmospheric corrosion level (C2~C3) | 240h no blistering, no rust, no cracking, no peeling | 240h no blistering, no rust, no cracking, no peeling |
| Atmospheric corrosion grade (C4~C5) a 720h | 720h no blistering, no rust, no cracking, no peeling | 720h no blistering, no rust, no cracking, no peeling | |
| Humidity resistance | Atmospheric corrosion grade (C2~C3) | no blistering, no rust, no cracking, no peeling | no blistering, no rust, no cracking, no peeling |
| Atmospheric corrosion grade (C4~C5) a 720h | 1440h no blistering, no rust, no cracking, no peeling | 1440h no blistering, no rust, no cracking, no peeling | |
| Note: a. Matching primer test. | |||
Construction and Project case
| The versatility of spray polyurea products |
| Product shelf life and storage: 1. The storage temperature should be 5-40ºC 2. Under normal storage and transportation conditions, the storage period is not less than 6 months from the date of production 3. Store in a cool, ventilated environment, avoid direct sunlight, prohibit close to fire sources, and prevent collisions 4. Packaging: component A: 220KG/drum, component B: 210KG/drum |
| Precautions: 1. During construction, the temperature of the substrate must be 3°C higher than the dew point temperature; 2. Before the product is used, component B should be fully stirred; 3. The system has a 100% solid content, and it is strictly forbidden to add any diluent; 4. During construction in a confined space, good ventilation must be maintained; 5. When using this product, you must wear work clothes, goggles, gas masks, gloves and other protective equipment. |
| Product application guidance: Recommended spraying machine: Graco H-XP3 polyurea spraying equipment spray gun; air or mechanical self-cleaning polyurea spray gun Static pressure 2300-2500psi; dynamic pressure 2000-2200psi Recommended dry film thickness: 1000-3000μm Recoating interval≤6h |
| Proportion: Component A: Component B =1:1 |
Packaging and Shipping
FAQ
1. What is the price for polyurea materials?
The price is decided by Quantity .
2. How about samples?
Sample Lead Time: 5 working days
Sample Fee:
1).It's free for all for a regular customer
2).For new customers, we will charge first, it is fully refundable when order confirmed.
3. How many days for shipping?
Shipping Methods and Lead Time:
By Express: 3-5 working days to your door (DHL, UPS, TNT, FedEx...)
By Air: 5-8 working days to your airport
By Sea: Pls advise your port of destination, the exact days will be confirmed by our forwarders, and the following lead time is for your reference. Europe and America (25 - 35 days), Asia (3-7 days), Australia ( 16-23 days)
4. What is the Terms of Payment?
Credit Card,T/T, L/C, Western Union; 30% T/T in advance, 70% before delivery.
5. Packaging & Shipping ?
Pallet, wooden case or with outer carton, or as customers' specific requirements.
6. Why choose your company?
We are focusing on all aspects of anticorrosive waterproof, insulation fields. US technology and made in China, high quality and nice prices.
We strictly implement the rules according to the quality standard in every aspects from the purchase of raw material to the production process and outgoing of products.
Great service and Superior quality is provided all the time…
Packaging & Shipping Packing: Carton, wooden box and pallet, or as customers' requirements.
Shipping: By Express (DHL /UPS /TNT /FedEx /EMS), By Air, By Sea
