Audited Supplier
LXPU-H2
Polyurethane Foam Machine
PU
high Pressure Motivated
Semi-Auto
Computerized
CE, ISO9001:2008
Plywood Case
3800*1900*2300
Mainland China
8477409000
Product Description
COMPANY INTRODUCTION VIDEO LINKE: https://youtu.be/ZbQmDYK5p-E
Equipment Characteristic:
High Pressure Mixing Head
The L type twice mixing head adopts high quality alloy and the most advanced heat treatment process
in China.All cleaning can be finished by clean shafts without wasting materials.
High and Low Pressure Switching Valve
The adoption of high pressure resistant 35Mpa stainless materials optimizes the valve structure and
ensure the pressure resistance and anti-abrasive seal without leaking for long term usage.
Permanent Magnet Joint Shaft
The permanent magnet joint shaft consists of outer rotor,inner rotor and isolation set,which solves the
leaking issues in seal and troubles of changing the material pump seal frequently thoroughly.
Human-computer interface
The use of big touch screen makes the operation intuitive,be easily understood and avoid error efficiently.
High Pressure Plunger Pump
Supplied in set by two famous PU special pumps manufacturers,one is Germany Rexroth, the other is
China Gelanrex, Lingxin has built long term cooperation with them.
Technical Parameters:
Final Product examples:
Car cushions, head cushions, steering wheels, bumpers, instrument boards, sunshade boards,
motor bicycle cushions, thermal insulation materials, refrigerator materials, roof insulating slabs,
office chairs, handrails, fitness equipments, medical appliances, building materials, etc.
Equipment Characteristic:
High Pressure Mixing Head
The L type twice mixing head adopts high quality alloy and the most advanced heat treatment process
in China.All cleaning can be finished by clean shafts without wasting materials.
High and Low Pressure Switching Valve
The adoption of high pressure resistant 35Mpa stainless materials optimizes the valve structure and
ensure the pressure resistance and anti-abrasive seal without leaking for long term usage.
Permanent Magnet Joint Shaft
The permanent magnet joint shaft consists of outer rotor,inner rotor and isolation set,which solves the
leaking issues in seal and troubles of changing the material pump seal frequently thoroughly.
Human-computer interface
The use of big touch screen makes the operation intuitive,be easily understood and avoid error efficiently.
High Pressure Plunger Pump
Supplied in set by two famous PU special pumps manufacturers,one is Germany Rexroth, the other is
China Gelanrex, Lingxin has built long term cooperation with them.
Technical Parameters:
| Injection Output: | 50-5000g/s | Repeat injection accuracy: | ±1% |
| Material tank volume: | 250L-500L | Compressed air needed: | Dry,oil free P:0.7Mpa Q:600NL/min |
| Injection pressure: | 10-20Mpa(adjustable) | Temperature control system: | Heat: 2×9Kw |
| Mixing ratio range: | 1:5~5:1(adjustable) | Input power: | Three-phase five-wire 380V |
| Injection time: | 0.5~99.99S(correct to 0.01S) | Total power: | 39KW-123KW |
| Material temperature controlling error: | ±2ºC | Raw material viscosity(22ºC): | POLY ~2500MPas ISO ~1000MPas |
Final Product examples:
Car cushions, head cushions, steering wheels, bumpers, instrument boards, sunshade boards,
motor bicycle cushions, thermal insulation materials, refrigerator materials, roof insulating slabs,
office chairs, handrails, fitness equipments, medical appliances, building materials, etc.
