Audited Supplier
E3
1 Year
1 Year
Polyurethane Foam Machine
Polyurethane
High-Pressure Air Type
Automatic
Non-Computerized
CE, ISO9001:2008
Polyurethane Spray Foam Machine
Driven Mode
17MPa
0.5-0.8MPa ≥0.9m3/Min
Blue, Green or OEM
2-12kg/Min
Polyurethane Insulation Spray and Injection
90m
Keywords
Mingko
Wooden Case
CNMC-E3
Shandong
Product Description
Cheap Portable Polyurethane Pu Spray Foam Machine
Cheap Portable Polyurethane Pu Spray Foam Machine For Wall Roof Tank Container Insulation is used to spray coating two-component liquid materials for Exterior Interior wall, Roof, Tank, cold storage spraying insulation. It can be used for various construction environment with spraying a variety of two-component spray materials and has been widely used in embankment waterproof, pipeline corrosion, auxiliary cofferdam,tanks, pipe coating, cement layer protection, wastewater disposal, roofing, basement waterproofing,industrial maintenance, wear-resistant linings, cold storage insulation, wall insulation and etc.
Polyurethane pu foam spray machine
1. The use of a large power cylinder makes the spraying more powerful and the atomization effect better.
2. The heated hose of the new Upgrade machine E3 heats up faster. In cold winter, the machine can pre heat the foam chemicals rapidly to help save time and improve spraying effect and foaming effect. Equipped with a reflux valve, it is very convenient for the operator to cycle the chemicals.
3. The machine contains the electric leakage protector to prevent machine leakage and human electric shock, and improve the safety performance of the machine.
4. Adding Voltmeter and Ammeter , so the voltage and current conditions inside the machine can be detected.
5. Appearance design conforms to the principle of artificial mechanics, moving the machine is easier.
6. The heated hose is with internal heating and low voltage current, to protect the operator's personal safety to the greatest extent.
7. The quick opening door is installed ,Machine maintenance and repair and inspection will be more convenient
1. The use of a large power cylinder makes the spraying more powerful and the atomization effect better.
2. The heated hose of the new Upgrade machine E3 heats up faster. In cold winter, the machine can pre heat the foam chemicals rapidly to help save time and improve spraying effect and foaming effect. Equipped with a reflux valve, it is very convenient for the operator to cycle the chemicals.
3. The machine contains the electric leakage protector to prevent machine leakage and human electric shock, and improve the safety performance of the machine.
4. Adding Voltmeter and Ammeter , so the voltage and current conditions inside the machine can be detected.
5. Appearance design conforms to the principle of artificial mechanics, moving the machine is easier.
6. The heated hose is with internal heating and low voltage current, to protect the operator's personal safety to the greatest extent.
7. The quick opening door is installed ,Machine maintenance and repair and inspection will be more convenient
| Model | CNMC-E3 |
| Power source | 220V/110V/380V 50/60HZ |
| Heating power | 7.5KW |
| Driven mode | pneumatic |
| Air source | 0.5~0.8 MPa ≥0.9m³/min |
| Raw output | 2~12 kg/min |
| Maximum output pressure | 17Mpa |
| AB material output ratio | 1:1 |
| Max hose support | 90m |
