Audited Supplier
Main features:
- Frequency step : 200K (digital radio signal), 1K, 100Hz.
- Testing distance : UHF : 8m, VHF : 5m.
- Testing range : 50 MHz ~ 2.4 GHz
- Antenna : pulling out antenna
- Battery : 9V 6F22
- Auto power off time : 1 mins. (except for the digital signal gear)
- Operation : the only one button with all functions
Operation:
The only one button with all functions.
The 1st pressing to turn on
Welcomingrelease the button return to powering off mode
***continually pressing
To choose the 200k steprelease button , 200k mode for digital radio
***continually pressing
To choose the 1k step -- release button , 1k mode for faster testing
***continually pressing
To choose the 100Hz step release button, 100Hz mode for accurate testing
***continually pressing
Turned on (1k or 100Hz mode) turned on (200k mode)|
Press quickly and release normal pressing
To lock the screen display Bye Bye
Press quickly again and release release the button, then power off.
Unlock the screen
continually pressing for 2 sec or more
Display BI BI
Release the button, then power off.
Q: Why sometimes your partner's voice is intermittent?
A: Please note that you are within normal communication range, If you want use radio in distance range, please change other antenna with a bigger output power.If still same problem, please send the radio back to your authorized dealer repair.
Q: Can't turn on talky and even it is switch on, it often shuts off automatically?
A: Please check the battery contacts on the walkie talkie. If it is broken or twisted, please return the radio to your authorized dealer for maintenance during warranty.
Q: Can't transmit or receiver signal with other members?
A: First, please verify that the channel frequency and the CTCSS, you are used the same as those of your group members. Please make sure that you and your partners are all within the radio coverage, If the channel frequency and the CTCSS are the same.
Q: Why sometimes received voice from other groups?
A: Two way solutions.You can change another channel or change another channel frequency by PC software.
Q: Which is better -VHF or UHF?
A: epends on the terrain. The UHF signal is attenuated or absorbed by foliage, rough terrain and trees, VHF does better outdoors. The VHF has difficulties penetrating steel and concrete, UHF does better in and around buildings. If you use the radios in both environments, we prefer using UHF band.
