
Features:
- The digital isolation technology is used to suppress the drift of ECG signal, AC filter, EMG filter and heart rate detection by the processor to ensure the authenticity and reliability of the output signal.
- It has the function of automatic measurement of conventional ECG parameters (more than 200 cases), which can reduce the burden of doctors. Automatic mode and manual mode are available.
- Baseline stability test, ensure that each time can be printed out neat and beautiful ECG waveform
- Manual/auto 1, 1+1, 3CH display
- Manual/auto working modes

Technical Specification
Sampling rate: | 1000Hz |
Frequency Response: | 0.05- 150HZ (-3dB) |
Time Constant: | 3.2s |
CMRR: | > 100db |
Patient Leakage Current: | <10uA |
Input Mode: | floating input |
Input Circuit: | <50uA |
Noise level: | <15uVp-p |
Sensitivity valve: | 20uV |
Polarization Voltage: | 1mV± 2% |
Continuous Operation: | AC≥10h & DC ≥ 3h |
A/D Converter: | 14bit |
Input Impedance: | ≥ 50MΩ |
Sensitivity: | 2.5, 5, 10, 20mm/mV ± 2% (4 levels/automatic adjustment) |
Paper Speed: | 6.25, 12.5, 25, 50mm/s ± 3%(4 levels adjustment ) |
Recording Mode: | Thermal array printer |
8 dot/mm(Vertical ) | |
40dot/mm(Horizontal, 25mm/s) | |
Paper Size: | 80mmx20m, roll paper |
Filter: | |
AC: | 50/60Hz(-20dB) |
Drift: | 0.15Hz - 0.5Hz |
High Frequency: | 70Hz/100Hz/150Hz |

Physical Specification:
Electrical Power | |
AC: | 220V10%,50Hz/60Hz |
DC: | Built-in rechargeable battery |
Data Storage: | 20 sets Environmental Conditions |
Transportation Temperature: | -20 ºC+50 ºC |
Relative Humidity: | 10%-95% |
Atmospheric Pressure: | 700hpa-1060hpa |
Storage Temperature: | -20 ºC+50 ºC |
Relative Humidity: | 10%-95% |
Atmospheric Pressure: | 700hpa-1060hpa |
Operation Temperature: | 5 ºC+40 ºC |
Relative Humidity: | 25%-80% |
Atmospheric Pressure: | 700hpa-1060hpa |



