Audited Supplier
1.Gas Control System: It is simple and reliable. Inlet rate from 0 to 100% and be adjusted automatically depending on the gas consumption. Automatically adjust the engine throttle to save diesel fuel.
2.Microcomputor Intelligent Control: Air compressor discharge pressure, exhaust gas temperature, engine speed, oil pressure, water temperature and fuel tank level operating parameters with automatic alarm and shutdown protection.
3.Multi-Stage Air Filter and Large Oil-Water Cooler: It is not only suitable for dusty work environment, but it is suitable for high temperature and high altitude environment.
4.Parts and Components: They can be maintained within the accesible range which is convenient and easy.
5.Covenient: Easy to move in rough terrain.Each compressor has lifting rings on the top for safe hoisting and transportation.
| Single Stage Compression Portable Diesel Screw Air Compressor | |||||
| Model | Capacity | Pressure | Diesel engine type | Weight | Dimensions |
| m3/min | bar | KGS | L×W×H mm | ||
| SYC-3/7 | 2.8 | 7 | 32kw | 1000 | 2200*1560*1400 |
| SYC-5/7 | 5 | 7 | 41KW | 1100 | 2821X1470X1361 |
| SYC-6/8 | 6 | 8 | 55kW | 1400 | 3750×1920×1700 |
| SYC-7/8 | 7 | 8 | 4D80-K20,58kW | 1400 | 3750×1920×1700 |
| SYC-8/7 | 8 | 7 | 65kw | 1400 | 3750×1920×1700 |
| SYC-8/8 | 8 | 8 | 65kw | 1400 | 3750×1920×1700 |
| SYC-9/8 | 8.8 | 8 | 75kW | 1600 | 3750×1920×1700 |
| SYC-10/7 | 10 | 7 | YC4D95Z-K20,70kW | 1900 | 3900×1920×1700 |
| SYC-8.5/14 | 8.5 | 14 | 4BTA3.9-C125,93kW | 1900 | 3900×1920×1900 |
| SYC-10/10 | 10 | 10 | 4BTA3.9-C125,93kW | 1900 | 3900×1920×1900 |
| SYC-10/13 | 10 | 13 | 4BTA3.9-C125,93kW | 2050 | 4080×1980×2350 |
| SYC-13/10 | 13 | 10 | 4BTA3.9-C125,93kW | 2050 | 4080×1980×2350 |
| SYC-12/7 | 12 | 7 | 4BTA3.9-C125,93kW | 2050 | 3900×1980×1900 |
| SYC-12/12 | 12 | 12 | 6BTA5.9-C180,132kW | 2380 | 4080×1980×2350 |
| SYC-12/13 | 12 | 13 | 6BTA5.9-C180,132kW | 2750 | 4080×1980×2350 |
| SYC-13/13 | 13 | 13 | 6BTA5.9-C180,132kW | 2750 | 3450×1520×2220 |
| SYC-17/7 | 17 | 7 | 6BTA5.9-C180,132kW | 3350 | 3380×1640×2350 |
| SYC-15/13 | 15 | 13 | YC6A240-20,177kW | 3350 | 3380×1650×2500 |
| SYC-16/13 | 16 | 13 | 6CTA8.3-C215,158kW | 3350 | 3980×1800×2450 |
| SYC-13/17 | 13 | 17 | 6CTA8.3-C215,158kW | 3400 | 3780×1980×2350 |
| SYC-17/14.5 | 17 | 14.5 | 6CTA8.3-C260,194kW | 3400 | 3980×1800×2450 |
| SYC-19/14.5 | 19 | 14.5 | 6CTA8.3-C260,194kW | 3400 | 3980×1800×2450 |
| SYC-18/17 | 18 | 17 | 6CTA8.3-C260,194kW | 3400 | 3980×1800×2450 |
| SYC-20/13 | 20 | 13 | 6CTA8.3-C260,194kW | 3400 | 3980×1800×2450 |
| SYC-22/8 | 22 | 8 | 6CTA8.3-C260,194kW | 4000 | 4580×1950×2600 |
| SYC-26/8 | 26 | 8 | 6CTA8.3-C260,194kW | 4000 | 4580×1950×2600 |
| SYC-22/14 | 22 | 14 | 6CTA8.9-C325, 239kW | 4500 | 4580×1950×2600 |
| SYC-27/10 | 27 | 10 | 6CTA8.9-C325, 239kW | 5000 | 4600×1950×2850 |
| SYC-30/10 | 30 | 10 | 6CTA8.9-C325, 240kW | 5000 | 4600×1950×2850 |
| Two Stages Compression Portable Diesel Screw Air Compressor | |||||
| SYC-19.5/19 | 19.5 | 19 | 6CTA8.3-C260,194KW | 3700 | 3650*1800*2500 |
| SYC-22/20 | 22 | 20 | 6LTA8.9-C360,265KW | 4500 | 4600*1950*2850 |
| SYC-26/20 | 26 | 20 | 6LTA8.9-C360,265KW | 4850 | 4600*1950*2850 |
| SYC-27/22 | 27 | 22 | NTA855-P400 | 5000 | 4600*1950*2850 |
| SYC-26/25 | 26 | 25 | QSZ13-C500 | 5100 | 4700*2100*2500 |
| SYC-21/35 | 21 | 35 | QSZ13-C500 | 5100 | 4700*2100*2500 |
| SYC-33/25 | 33 | 25 | QSZ13-C550 | 5200 | 4700*2100*2500 |
| SYC-26/35 | 26 | 35 | QSZ13-C550 | 5200 | 4700*2100*2500 |
Our service
1.Pre-sale service:
Act as a good adviser and assistant of clients enable them to get rich and generous returns on their investments .
1.Select equipment model.
2.Design and manufacture products according to client's special requirement ;
2.Services during the sale:
1.Pre-check and accept products ahead of delivery .
2. Help clients to draft solving plans .
3.After-sale services:
Provide considerate services to minimize clients' worries.
1.Complete After-sales service,professional engineers available to service machinery at home or oversea.
(On-site service requires the customer to bear the cost)
2. 24 hours technical support by e-mail.
3.Other essential technological service.
Q1: What is the rotor speed for the air end?
A1: 2980rmp.
Q2: What's your lead time?
A2: usually, 5-7 days. (OEM orders: 15days)
Q3: Can you offer water cooled air compressor?
A3: Yes, we can (normally, air cooled type).
Q4: What's the payment term?
A4: T/T, L/C, Western Union, etc. Also we could accept USD, RMB, and other currency.
Q5: Do you accept customized voltage?
A5: Yes. 380V/50Hz/3ph, 380V/60Hz/3ph, 220V/50Hz/3ph, 220V/60Hz/3ph, 440V/50Hz/3ph, 440V/60Hz/3ph, or as per your requests.
Q6: What is your warranty for air compressor?
A6: One year for the whole air compressor(not including the consumption spare parts) and technical supports can be provided according to your needs.
Q7: Can you accept OEM orders?
A7: Yes, OEM orders are warmly welcome.
Q8: How about your customer service and after-sales service?
A8: 24hrs on-line support, 48hrs problem solved promise.
Q9: Do you have spare parts in stock?
A9: Yes, we do.
Q10: What kind of initial lubrication oil you used in air compressor?
A10: TOTAL 46# mineral oil.
