Portable Solar Lighting Power LED Home Light Kits

All of our solar LED lighting series can charge for all mobile phones

Part B---Item no.:  JT-FD020F (1W*3 led bulbs)

Product name: Solar LED Lighting System

Markets: Poor electricity area, no electricity area, camping lighting

LED lights: 3pcs 1W LED lamp ( Each LED lamp with 5m wire)
 

Lighting time(the same time lighting):

1pc LED lamp: 24 hours
2pcs LED lamp:12 hours
3pcs LED lamp:8 hours

Part C---Product Specification:

Solar panel: 3W 6V, 3M cable
Light source: 1W LED bulb * 3 pcs
Battery: 4500mAh 6V Lithium battery                                              
LED bulb: each bulb with 5M cable and switch on cable, IP54.
LED charging indicator: 3 LED
Mobile phone charging: USB port, with 5-in-1 USB charging connectors (Nokia 6101, Mini USB, Micro USB,Samsung G600)
Overcharge and overdischarge protection: yes,Rechargeable by AC charger: optional
Working hours on full battery
3 bulbs- 8 hours
2 bulbs-12 hours
1 bulb-24 hours

Part D---The whole system pack including:

Solar panel: 1pc

System box: 1pc

LED lamp with 5m switch wire: 3 set

AC charger:1pc(optional)

USB 1-5 wire: 1set(optional)

Instruction Book:1 pc

Warranty card: 1 pc

Test Report: 1 pc

Part E---Product Installation:

Step 1. Place the solar panel under sunlight;

Step 2. Insert the connector on wire of solar panel into system box port with "solar" word indication;

Step 3. Put the system box in any place without water, or hang on wall;

Step 4. Insert the connector of LED wire into system box with "LED" word indication;

According to your actual usage, 1-3pcs LED lamp are optional to be lighting in the same time; These 4 steps with photos will be shown in "Instruction Book".

When charging for mobile phones, please connecting the system box with "USB" word indication, 12V AC charger is optional to charge the system when using AC power.

Warranty: 2 years, please contact with our after-sales department for quality problem

Life-time: 3 years 100%, 5 years 90%, 8 years 80%

"Exclusive Agent" is allowed in a country or area

Official "Certificate of Authorization" will be provided after confirmation

Part F---Our Series and Photos





Part A---Quality Assurance Parts: solar panel, Battery, LED Lamp, PCB, Wires

Solar panel:

mono or poly cell crystalline, enough free electron in Silicon atom, the free electron absorb light photon and released, aluminum alloy frame, tempered glass cover, IEC61215, IEC61730 TUV test report, warranty 5 years, life-time with the efficiency: 10 years 100%, 20 years 90%, 30 years 8%;

Battery:

Lithium battery, 1.8*1.8*6.5cm standard size, 800-1000 time circles, made in Japan, wide work temperature, 12 months don't need to charge when in selling; warranty: 2 years, life-time:3-5 years 90% capacity, 5-8 years 80% capacity;

LED Lamp:

Lamp Crust: Aluminum alloy for hot dissipation(not for plastic crust), LED chips: famous brand in high efficiency(high light-electricity transformation); LED chips board: aluminum, to keep hot transmitting,(heat conductivity coefficient:1.5W, thickness:1.0mm)

(Work temperature decide the life-time of LED chips, hot transmitting and dissipation is necessary for a long life-time LED lamp, 36sqcm hot dissipation area for 1W is standard)

Warranty 2 years, life-time: 5 years 100%, 8 years 90%, 10 years 80%

PCB:

Board material: Glass fiber board, Function: battery over-charge and over-discharge protection, Constant current discharge for LED lighting, "LED indicator" for charging status, 5V/1A IC to protect charging current, IC component control for each group of LED lighting; warranty 5 years; life-time: more than 10 years;

Wires:

China Standard 3mm-4mm copper material wire, low resistance and long life-time, DC and AC current allowed, switch controller, E22,E27,B22 LED lamp holder; warranty 5 years, life-time: more than 10 years