Audited Supplier
SCR-5
36kVA
200A
50V
Thyristor Charger
Cc /CV
Single-Shock Charger
Cooper Transformer
50V 200A
Yes
Silicon Controlled
Charging
Over Current/ Over Voltage/ Short Circuit
Cc /CV
TORCH
Wooden Box
50*40*80CM
China
8504409990
Product Description
1 The sea level of the working site shall not exceed 3000m.
2 The ambient temperature ranges from -10°C to +50°C.
3 The relative humidity is not higher than 95%.
4 There is no conductive dust, explosive gas, corrosive gas for metal, infective gas for insulation and steam around the site.
5 There is no violent vibration and slope lager than 5°on the site.
6 The ventilation on the site must be good.
2 The ambient temperature ranges from -10°C to +50°C.
3 The relative humidity is not higher than 95%.
4 There is no conductive dust, explosive gas, corrosive gas for metal, infective gas for insulation and steam around the site.
5 There is no violent vibration and slope lager than 5°on the site.
6 The ventilation on the site must be good.
1 Charger technical parameters
2 Input: three phase AC380V 50Hz(as per customer requirement), the allowable voltagetolerance for the line is +5%.
3 power rate 108KVA.
4 The rated DC output current: 220A.
5 The rated DC output voltage: 300V.
6 The rated DC output voltage means the max. charge voltage, if the input AC voltage of the line is 10% lower than the nominal voltage, then the DC output voltage will be lower than rated voltage. The rated DC output current means the max. charge current during operation.
7 Functions: constant current, constant voltage.
8 The accuracy for constant current: the accuracy for current is less than t1% when therated value ranges from 20% to 100%.
9 The accuracy for constant voltage: the accuracy for voltage is less than t1% whenthe rated value ranges from 20% to 100%.
10 The running mode for the main circuit: three-phase full-bridge controlled rectifier.
2 Input: three phase AC380V 50Hz(as per customer requirement), the allowable voltagetolerance for the line is +5%.
3 power rate 108KVA.
4 The rated DC output current: 220A.
5 The rated DC output voltage: 300V.
6 The rated DC output voltage means the max. charge voltage, if the input AC voltage of the line is 10% lower than the nominal voltage, then the DC output voltage will be lower than rated voltage. The rated DC output current means the max. charge current during operation.
7 Functions: constant current, constant voltage.
8 The accuracy for constant current: the accuracy for current is less than t1% when therated value ranges from 20% to 100%.
9 The accuracy for constant voltage: the accuracy for voltage is less than t1% whenthe rated value ranges from 20% to 100%.
10 The running mode for the main circuit: three-phase full-bridge controlled rectifier.
KGCA charger is a new type special charger for battery . Charger contain DC Voltage Regulator, so charger can supply to the battery or dc load with power. This system is controlled by digital intelligent with multi charge mode, simple operation and reliability, there is no phase sequence requirement. The transformer is made by high strength paint copper, it can achieve H grade high temperature resistance and isolation, the power units are made by aluminum profile and high-power disc type thyristor units with high performance and reliability.
| Zibo Torch Machine Co., Ltd belongs to Zibo Torch Energy Co., Ltd(which has been established Since 1944), is a wholly state-owned modern enterprise for battery making equipments, charging and discharging equipments and industrial molding tools, and laser machine etc. The company has a strict system of standard production, quality control and staff management. The company has passed the Quality Management System Certification, ISO9001 Quality Management System Certification, Environmental Management and Occupational Safety and Health Management System Certification. Company has strong R&D strength. Our technicians are always updating the products such as Pressure Die Casting Machine, Dry Filling System, Acid Recirculation Machine, Wet filling machine, Grid Casting Machine, Grid Pasting Machine and Battery Formation charger, Forklift charger, golfcart battery charger, Laser marking machine and laser Engraving and cutting machine etc. Quality comes from strength, and Technology makes perfect. Based on the superb quality and our sincere service, our products have been sold to more than 20 provinces and municipalities and exported to India, Pakistan, Bangaldesh, Japan, Bulgaria, Poland, Netherland, Zimbabwei, Peru, and some other countries and have won great praise from many famous battery companies in China and around the world, such as, Camel, Narada, Leoch, Base, Luminous, Gold Star, Southern Battery, JAY ACE, GS etc. As in the future full of new opportunities and challenges, we will continue to provide qualified products and more faithful service to meet your higher requirements to become a first-class power equipment supplier. |
1. Are u manufacturer?
we are Subsidiary of Zibo Torch Energy ( which is a subsidiary of CSSC). Our group company manufacture different kinds of goods. We can sell all the products which are produced by ourself and by our sister companies. Like the machines for battery making, laser machines, charging system, batteries, material for battery making etc.2. How long is the warranty?
1 year warranty, and after one year we can provide spare part as per your order.
3. How can we reach your factory?
our Factory locates in ZIBO city, you can take train and reaching ZIBO station , or you can take flight reaching JINAN or Qingdao Airport. We will arrange the pickup.
4. How long is the delivery time?
Usually it depends on your products and the QTY,, the delivery time varies from 3days to 90 days.5. How to pay ?
You can pay to our company account directly with the PI provided by us. We accept TT and L/C.6.What is the delivery terms?
We can arrange the delivery by sea, by air and by express carrier, Such as DHL, TNT, UPS, Fedex etc. FOB, CFR and CIF are all OK for us. And the nearest port is Qingdao port. 
