Audited Supplier
HD-60V100A
12 Months Warranty & Life-Time Sale Service
12 Months Warranty & Life-Time Sale Service
Batteries Monomer Tester
All
Battery
Customized
AC380V
1mv
1mA
0V ~ 60V
6V ~ 60V
2-8
HONGDIAN
Wooden Case
SIZE: 686mm X 730mm X1470mm
Shenzhen China
9030899090
Product Description
Battery Pack Testing Machine,battery charge discharge tester,battery charge discharge test system
Product images appearance and channnels are for reference only and can be customized according to customer needs
Machine features
Feature
The aging cabinet is mainly used for testing the charging and discharging cycle of finished lithium batteries. The testing items include: battery charging protection voltage, discharging protection voltage, capacity, etc. The equipment has charging, discharging, shelving, and cycling four testing steps. The battery can be tested according to the set process by editing the corresponding steps.
| Item | Technical Parameters |
| Wiring Method | AC380V Three-Phase Five-Wire System |
| Input Power Supply | AC380V |
| Power Factor | ≥99%(full load) |
| THDi | ≤5%(full load) |
| Maximum feedback efficiency | ≥92%(full load) |
DC output parameters
| Item | Technical Parameters |
| Voltage range | Charging Voltage: 0V ~ 60V Discharging Voltage: 6V ~ 60V |
| Voltage Accuracy | ±0.05%FS |
| Voltage Resolution | 1mV |
| Current Range | -100A~ 100A |
| Current Accuracy | ±0.05%FS |
| Current Resolution | 1mA |
| Current Response Time | 10ms(10%FS ~ 90%FS) |
| Charge/Discharge Conversion Time | 20ms(-90%FS ~ 90%FS) |
| Channel Control Mode | All channels can be independently controlled. |
| Auxiliary channels | Each channel is equipped with an auxiliary temperature channel. |
Step Function Features / Function Features of Operation Steps
| Item | Technical Parameters |
| Minimum Data Logging Time | 10ms |
| Editable Number of Steps | 2000 |
| Number of Step Cycles | 65535 |
| Step Cycle Nesting | 5 |
| Charge and Discharge Modes | Idle, Pause, Constant Current Charge (CC), Constant Voltage Charge (CV), Constant Resistance Charge (CR), Constant Current Constant Voltage Charge (CCCV), Constant Power Charge (CP), Constant Current Discharge (DC), Constant Power Discharge (DP), Constant Resistance Discharge (DR), Direct Current Internal Resistance Test (DCIR) |
| Termination Criteria | Voltage, Current, Capacity, Energy, Time, Power, Cycle Count, BMS Parameters, Custom Advanced Parameters (Supporting Single or Multiple Logic AND/OR Combinations) |
| Execution Action Types | Jump, Pause, Protect, Next Step |
| Importing DBC Files | Supports File Editing, Saving, and Importing |
| Direct Current Internal Resistance Testing (DCIR) | Supports DCIR (Direct Current Internal Resistance) test steps, hardware real-time calculation, and supports two types of tests: (V1-V2)/(I1-I2) and (V1-V2)/I. |
| Data Export Methods | Export data in Excel and CSV formats. |
Protection Functions
| Item | Technical Parameters |
| AC-Side Protection | AC Grid Voltage Over/Under Voltage Protection, Surge Protection, Anti-Islanding Protection, Over/Under Frequency Protection, Hardware Overtemperature Protection, Self-Test Protection, etc. |
| DC-Side Protection | Bus Over/Under Voltage Protection, Hardware Overtemperature Protection, Battery Channel Line Reverse Connection Protection, etc. |
| Battery-Side Comprehensive Protection | Battery pack total voltage upper/lower limit protection, battery cell voltage upper/lower limit protection, battery temperature upper/lower limit protection, battery charge/discharge current upper limit protection, battery capacity upper/lower limit protection, BMS communication loss protection, network disconnection protection, etc. |
| Ingress Protection (IP) Rating | IP22 |
| Operating Temperature Range | 0ºC~ 45ºC |
| Cooling Method | Forced Air Cooling |
| Sound Level | ≤75dB |
Function Features:
The charge discharge testing system mainly includes PC software, USB hub, router, aging instrument. The core is aging instrument, aging 32 bit ARM chip was chosen as main control chip, compared to the traditional microcontroller in the execution speed greatly improved, measuring voltage and current accuracy is higher, through the RS232, network transmission data.
1. With constant current and constant voltage charging function
2. With constant current discharge function
3. Fully meet the battery charge and discharge with mouth and separation requirements, that is, 2 lines (P+ P-) and 3 lines (P+ P- C-). At the same time, the CH+ P+ P- can be used to protect the negative plate discharge by aging the positive plate charging protection.
4. By charging and discharging the battery, the charge protection and discharge protection of the battery can be detected.
5. Charge and discharge the battery, record the charge capacity and discharge capacity of the battery.
6. Anti reverse protection function, upper and lower voltage set protection, safety discharge current protection (maximum current 20A);
7. Within 10 machines, through the serial port to connect the PC computer;; more than 10 sets of equipment, you can use the network connection mode. In this way, PC computer only need to provide a network port, you can control less than 254 instruments.
8 Aging instrument software system using the classic mature C/S model
9. Based on the Windows interface, the use of MYSQ database storage test data, and can export curves.
