Audited Supplier
FMOU-7
After-Service Is Provided
12 Months
Combined
Gas Atomization
Parallel Flow
Dielectric
Customisable
Air
Vacuum
Continuous
Fmou-7
SUS403# Stainless Steel
About 260kg
Class100
+/- 0.5 Degree Celsius
0.1 Degree Celsius C/1 Degree Celsius
Baked Enamelled Steel Plate
Fiberglass Wool
#9003 Light Sand Colour
+40~1000ºC
W610mm×d610mm×h610mm
FanQi
Both Can
Inner size: W610mm× D610mm× H610mm
Kunshan, China
Product Description
| Other Specification | |
| Timer | Adopting electronic timer, the time limit is 0-9999 minutes. |
| Air supply system | Adopting horizontal air supply, special air circuit design to ensure the same air volume up and down and even temperature. |
| Air supply motor | adopts Taiwan-made high temperature resistant oven special long shaft motor, stable performance. |
| Temperature control | Adopt Higashizaki digital thermostat PID algorithm, SSR output. |
| Temperature difference range | <=±1 (6-point empty oven test) |
| Production cycle | (according to the baked product process requirements) |
| Air source | adjustable 6 |
| Exhaust | adjustable 6 |
| Heating time | room temperature heating to 150 ºC about 25 minutes. |
| Inner size | W610mm × D610mm × H610mm (standard machine) |
| Weight | about 260Kg |
| Power supply | AC 380V three-phase 50Hz 18KW |
1. The structure adopts double chamber design, the control box is located on the right side of the machine.
Additional explosion-proof door buckle, equipped with temperature-resistant silicone compression, tight and easy to close and open.
It can prevent accidents from happening. The machine can be used with trolley after landing.
2. Insulation is excellent, six-side heat insulation, heat insulation cotton thickness of not less than 150MM.
The temperature of the exterior of the oven is low, saving energy and environmental protection.
3. Insurance mechanism is superior, over-temperature preventer, motor overload current protection, control line insurance,
electric overload protection, no fuse switch, etc..
4. Mature technology, fast production cycle, perfect logistics channel
5. Comply with international testing standards.
6. Highly customisable.
7. Best after-sales service: one year free parts maintenance.
If you are interested in any of our company's programs, please contact me or send me an e-mail!
For more product information, please go to the homepage.
