Audited Supplier
Once the materials to be separated enter the fast-spinning basket, it will be filtrated by the filter liner under the centrifugal force. The liquid flows out through the liquid outlet, but solids deposit on the internal wall of the basket. Once the solid cake reaches the rate capacity, feeding stops. Wash the solids cake, and then drain out the washing water. Finally stop the machine. The solid cake is discharged manually and move to next batch.
Technical Parameters
Main features
1,With full-turnover cover design and polished surface leaves no residual heel. The case, fixing parts and basket are made of stainless steel. It is easy to clean the gap between the case and the basket.
2,Platform base design lowers the center of gravity and requires minimum installation space. The platform base can be used for operation platform.
3,Liquid-damping vibration isolators, simplify the routine maintenance.
4,Full-turnover hinged cover, feeding pipe, washing pipe, observation glass and light. Automatic CIP system (optional) cleans the internal surface of the case, the basket and liquid slot to meet the clean requirement in accordance with GMP standards.
5,Wide range of applications. No damage to the particle shape.
6,Inverter start-up, smooth starting, adjustable relative centrifugal force. Tightness structure with silicone rubber or fluoroelastomers seals. Nitrogen protection system (optional) is for anti-explosion applied to poisonous, flammable and explosive environment.
7,It can be configured with manual, hydraulic and a variety of forms of flip.
Nitrogen protection system is an option for customers when the machine working in flammable or explosive places,which can improve the safety of centrifuge used in these occasions,so as to reduce the use risk.
Before nitrogen filling, confirm whether the pressure, flow and nitrogen concentration of nitrogen source meet the use requirements
| Name | Parameter | Influence |
| Nitrogen filling pipe diameter | D16 | The smaller the nitrogen filling pipe diameter is, the longer the replacement time will be |
| Nitrogen source pressure | 2-3bar | Slightly affect nitrogen filling replacement time |
| Nitrogen charging pressure (working condition) | 1.5bar | Affect nitrogen filling replacement time |
| Nitrogen flow (standard condition) | 0.8-0.9m3/min(Large flow )+0.05m3/min(small flow) | Affect nitrogen filling replacement time |
| Nitrogen consumption of large flow nitrogen filling(standard condition | 2.5-3m3 in 3 minutes | Affect nitrogen filling replacement time |
| Nitrogen purity | ≥99% | The lower the purity of nitrogen, the more times the replacement time of nitrogen filling and the oxygen content of centrifuge meet the requirements (conventional 4% ~ 6% |
Under the above conditions, it is found that the replacement time of
nitrogen filling is about 5 minutes when the oxygen content in the
centrifuge reaches 5%.
