Audited Supplier
1) Single sand wire wheel structure machine: the adjacent sand wire wheel rotates forward and backward at high speed, the whole combination rotates at low speed and moves left and right, through grinding, brushing, sweeping, filing and other actions, all-round removal of workpiece residual burrs and rounding. Replace different mesh number of consumables to get different surface process requirements, adjust different pressure to get different cutting amount process, surface roughness Ra0.5-2.5, R Angle 0.2-1.5, cutting amount 1-20um, adjustable and controllable accuracy;
2) The combined version equipment is composed of sand belt + sand wire wheel combination structure. The sand belt rotates at high speed and moves quickly. The surface of the workpiece is ground to remove large burrs and slag to make the surface of the workpiece smooth. Then the edge is removed and the corners are rounded by the sand wire wheel grinding head.
3) The grinding head of the sand wheel is soft material, which can be inserted into the groove holes of the workpiece to remove internal burrs without affecting the surface accuracy of the workpiece, and only remove the burrs on the edge of the hole without damaging the surface film.
| Equipment specifications and processing range: processing width ≤850mm | Control system: man-machine interface, PLC programming control, one-click start and stop equipment; Power supply voltage: three-phase five-wire, 380V, 50HZ |
| Grinding head speed: 500-1800R/min, control system: man-machine interface, PLC programming control, one-click start and stop equipment; Power supply voltage: three-phase five-wire, 380V, 50HZ | Rated power: 15-35KW; Total weight (approx.) : 1-6T; Dimensions (length, width and height) : 2500-3500mm*1200-1800mm*1500-2300mm |
Q:How to remove product burrs?
A:The equipment consists of two groups of planetary brush disk combined structure; A single brush disc high-speed autobiography, the whole combination of rapid rotation, the front and back two groups of brush disc combination running in the opposite direction, through sweeping, grinding, filing and other actions, all-round no dead Angle to the workpiece edge, holes, grooves burrs
Q:What is the price of the equipment?
A:According to customer product process needs, machine configuration depends,High equipment configuration, preferential prices, much cheaper than Europe and the United States
Q:What are the features of the equipment?
A:The company independent research and development manufacturing, with complete independent intellectual property rights; The equipment is convenient to operate, simple to maintain, energy saving and environmental protection, stable and durable, and the processing product efficiency is high and the quality is good, and the equipment is upgraded for the metal parts polishing industry.
Powder Metallurgy Parts Fillet EquipmentPowder Metallurgy Parts Fillet EquipmentPowder Metallurgy Parts Fillet EquipmentPowder Metallurgy Parts Fillet EquipmentPowder Metallurgy Parts Fillet Equipment
A:The delivery time of our products in the peak season is 60 days, and the delivery time of our products in the off-season is about 30 to 45 days.
Q:What packing are the goods to be sent abroad?
A:The delivery time of goods abroad is long, and the wooden frame will be used to package to ensure the quality of the product is intact.
Q:What are the shipping methods supported by the goods?
A:We choose according to the needs of customers, FOB,CIF,CFR and so on.
