Audited Supplier
The high-speed and high-performance five-axis gantry machining center GF3020 has the characteristics of high rigidity, high precision and high efficiency processing. The integrated gantry design increases the contact area with the column mounting base, which can greatly enhance the bending and torsional strength of the gantry; the workbench adopts a reasonable slider span and is surface quenched to make the workbench evenly stressed and improve the hardness. ; The base is designed with golden ratio reinforced ribs to ensure uniform stress on the guide rail support surface and ensure the overall accuracy of the workbench operation; the whole machine adopts the best structural design to provide the best overall stability performance.
The three-axis rapid displacement is 36/30/30m/min, the T-T tool change time is only 2.9S, the tool magazine is fully loaded, 24-hour tool change without alarm, and the 3-dimensional inspection of each machine's trial processing sample has passed, ensuring the machine tool's quality after leaving the factory. High efficiency and continuous stability. It is suitable for various two- and three-dimensional concave and convex models with complex shapes and complex cavities and surfaces. It is also suitable for milling, drilling, expanding and boring of valves, cams, molds, plates and boxes in the manufacturing industry. Tapping and other processing processes are more suitable for both small and medium-sized batches of multi-variety processing and production, and can also be entered into automatic lines for mass production.
Adopting Siemens ONE system, 19-inch ultra-large LCD display, dynamic graphic display of tool path, intelligent warning display, self-diagnosis and other functions make the use and maintenance of machine tools more convenient and faster; the high-speed bus communication method greatly improves the data processing of the CNC system Ability and control performance facilitate the fast and efficient transmission and online processing of large-capacity programs.
| Item | Unit | Specification | |
| Worktable | Worktable (L×W) | mm | 3000×1200 |
| T-slot (number of slots-width×pitch) | mm | 7-22×150 | |
| Worktable Max. load | kg | 2500 | |
| Feed | X/Y/Z axis rapid displacement | m/min | 30/30/30 |
| A/C axis Max. speed | rmp | 60/60 | |
| A axis rotary range | ±110° | ||
| C axis rotary range | 360° | ||
| Cutting feed rate | mm/min | 1-12000 | |
| Travel | X/Y/Z axis travel | mm | 3000×2000×800 |
| door width | mm | 1600 | |
| Distance from spindle end face to worktable surface | mm | 150-950 | |
| A-axis 90° center to worktable distance | mm | 410-1110 | |
| The distance from the left and right 90° end face to the end face of the main shaft (Y direction) | mm | 1480 | |
| Spindle front and rear 90° end face to end face distance (X direction) | mm | 2480 | |
| Spindle | Spindle taper | mm | HSK-A100 |
| Spindle speed | r/min | 2580-10000 | |
| Spindle motor power (S1/S6 40%) | kW | 54 | |
| Spindle motor torque (S1/S6 40%) | N.m | 200-240 | |
| Tool magazine | Tool magazine storage capacity | T | 30 |
| Tool change time (T-T) | S | 2.9 | |
| tool diameter/length | mm | 120/400 | |
| tool weight | kg | 8 | |
| Three axis | X-axis guide rail | mm | 45/5 roller |
| Y-axis guide rail | 55/2 roller | ||
| Z-axis guide rail | 55/3 roller | ||
| X-axis screw | mm | R63×16 | |
| Y-axis lead screw | mm | R50×16 | |
| Z axis screw | mm | R50×12 | |
| Accuracy | Linear axis positioning accuracy | mm | ±0.005/300mm |
| Linear axis repeat positioning accuracy | mm | ±0.003/300mm | |
| Rotary axis positioning accuracy-A/C axis | arc-sec | 8 | |
| Rotary axis repeat positioning accuracy-A/C axis | arc-sec | 6 | |
| Lubrication system | Lubrication unit capacity | L | 10 |
| Lubrication type | Thin oil lubrication | ||
| Cutting fluid | Drain tank volume | L | 850 |
| Center outlet tank volume | L | 200 | |
| Other | air demand | kg/c | ≥6 |
| Air source flow | mm3/min | ≥0.5 | |
| Power supply: three-phase AC | 380V±10%,50Hz | ||
| Air pressure | MPa | 0.6 | |
| Machine Weight | t | 22 | |
| Dimensions (L x W x H) | mm | 8100*4890*5127 | |
Q1:How can l choose the most suitable machines?
A: Please tell me your specifications, and we will help you select the best model, or you can choose the exact model yourself. Alternatively, you can send us the product drawings, and we will recommend the most suitable machines for your needs.
Q2: What are the main products of your company?
A: We specialize in all kinds of machines, such as CNC Lathe Machine , CNC Milling Machine, CNC Turning Machine, Vertical Machining Center, Horizontal Machining Center, Lathe Machines, Turning and milling composite processing so on.
Q3: Where is our factory located? How can l visit there?
A: We have 5 factories located in Guangzhou, Quzhou, Ningbo, and Guangdong. You are warmly welcome to visit us.
Q4. How do you transport it?
A: Provide Transportation Solution DDP/CIF/FOB/FCA.
Q5: What are the Payment Terms?
A: T/T, 30% initial payment when ordering, 70% balance payment before shipment.
Q6:What's the OMQ?
A: 1 set. (Only some low cost machines will be more than 1 set )
We want to know:
1. We strongly suggest you tell us the size, and material of your workpiece for our evaluation, if possible, better to send us a workpiece drawing so that we can recommend you the most suitable model.
2. If need a CIF Price, please kindly tell us the port of destination.
