Audited Supplier
Water
En1092
Low Temperature
Flange
Single-Seat
Diaphragm
Cast Iron
Pressure Reducing Valve
Ductile Iron, Stainless Steel
Stainless Steel
Nylon+EPDM/Viton
Ss / Bronze
NBR/EPDM/Viton
Brass or Stainless Steel
Copper or Stainless Steel
Pn10/16/25
Epoxy Resin Coated to 300 Microns Inside & Outside
WALTER
Bubble Bags and Wooden Case
2"-24"
Suzhou, Jiangsu
8481804090
Product Description
Pressure Reducing/Pressure Regulating Valve (PRV) automatically reduces a higher inlet pressure to a steady lower downstream pressure, regardless of changing flow rate and/or varying inlet pressure
Our Pressure Reduing Valve are adopt the lastest technologies , with fully bore design, lowest head lose when fully open.
The PRESSURE REDUCING VALVE is design with anti-cavitation for application where there is high potential for damage from Cavitation , which provide optimum internal pressure control through a unique anti-cavitation trim design.
1. Body/Bonnet: GGG50 or Stainless Steel 2. Spring: SS304
3. Stem: SS / Bronze 4. Disc Retainer: DI/SS/Bronze
5. Seat: SS/Brass 6. Seal Rings: NBR/EPDM/Viton
7. Pilot: Stainless Steel 8. Pipe or Tubes: Coppe or Stainless Steel
9. Working Pressure: PN10/16/25 10. Connection: Flanged acc. To EN1092.2, ISO 7005-2, ANSI/JIS/ AS2129
11. Epoxy Resin Coated to 300 microns inside & outside
12. Anti-cavitation Solution
Our Pressure Reducing Valve Size from DN50 to DN1000; Also can do OEM or ODM for Pressure Reducing Valve, Float Control Valve, Pressure Relief Valve, Solenoid Control Valve.
Welcome to contact us for more details.
Our Pressure Reduing Valve are adopt the lastest technologies , with fully bore design, lowest head lose when fully open.
The PRESSURE REDUCING VALVE is design with anti-cavitation for application where there is high potential for damage from Cavitation , which provide optimum internal pressure control through a unique anti-cavitation trim design.
1. Body/Bonnet: GGG50 or Stainless Steel 2. Spring: SS304
3. Stem: SS / Bronze 4. Disc Retainer: DI/SS/Bronze
5. Seat: SS/Brass 6. Seal Rings: NBR/EPDM/Viton
7. Pilot: Stainless Steel 8. Pipe or Tubes: Coppe or Stainless Steel
9. Working Pressure: PN10/16/25 10. Connection: Flanged acc. To EN1092.2, ISO 7005-2, ANSI/JIS/ AS2129
11. Epoxy Resin Coated to 300 microns inside & outside
12. Anti-cavitation Solution
Our Pressure Reducing Valve Size from DN50 to DN1000; Also can do OEM or ODM for Pressure Reducing Valve, Float Control Valve, Pressure Relief Valve, Solenoid Control Valve.
Welcome to contact us for more details.
